The leakage of the toilet is not effective with non smashing brick plugging agent

The plugging agents sold on the market are generally temporary to solve the problem, and do not completely solve the problem of water leakage in the bathroom. Therefore, there are still two methods, one is to smash bricks to replant waterproofing, and the other is to solve the problem of toilet leakage with stamping technology.

The answer is not to smash the floor tiles to judge the severity of the bathroom leakage, it is a slight water leakage, then the bathroom does not smash the tile with waterproof paint is reliable, after all, the waterproof material without smashing the brick can prevent the slight leakage of the bathroom, and it can also play a certain waterproof protection effect. It will not destroy the original decoration either. It is enough to use waterproof leak repair paint.

If the leakage in the bathroom is more serious, the problem cannot be solved without smashing the tiles, and the pipes need to be knocked open to repair the pipes.

Toilet waterproof leakage can not smash bricks, the use of brick-free special waterproof materials, which penetrate into the mortar layer through the tile gaps, penetrate into the inside of the mortar layer and undergo a chemical reaction, produce particulate matter that will not be dissolved, can completely block the capillary pores in the cement mortar, the capillary leakage water channel, when the product penetrates into the cement board and reacts with the chemicals in the cement, the waterproof layer will be produced, and the cement board is closely combined into a whole, with the effect of waterproofing.

The method of waterproof leakage in the bathroom is: leakage on the top of the bathroom, need to find the location of the leakage, repair, the water consumption of the bathroom is very large, the ground is generally very damp, especially in the rainy season, the wall tiles fall off or there is a phenomenon of mold, at this time there will be water slowly seeping out, forming small water droplets on the roof, falling down drop by drop, you need to find the location of the leakage, and repair it.

It depends on the quality of the product, different brands, different raw materials, and different waterproof performance. Some may be in charge for a month or two, and some may be in charge for half a year.

Water leakage must be fundamentally controlled.

There are generally two types of water leaks:

First, the pipe rupture leads to water leakage, which needs to be replaced and re-waterproofed.

Second, the waterproofing is not done well, resulting in water leakage, and the overall waterproofing needs to be redone.

It is recommended to find a renovation worker to find the leakage point (around the water pipe, the corner of the wall is an area prone to water leakage), and then re-waterproof the water leakage.