The tiles in the bathroom have been used for many years, and there is some dirt on the brick surface

Updated on Bathroom 2024-08-20
8 answers
  1. Anonymous users2024-01-24

    This situation is mainly limescale, rust, soap scale, ash scale, etc., which are formed after a long time, and if you take a shower in it, there will be human oil stains. This mixed stain is indeed more difficult to remove. The methods of those upstairs must not work, and if you don't believe the landlord, you can give it a try.

    I recommend 2 products to you, the brand is the shield king, one is the all-effect decontamination king, the other is the descaling king, the descaling king removes scale soap stains and human body oil and ash is very good, and the descaling king removes scale and rust The effect is very obvious. With these 2 products, you can basically solve your problem, if the crevices are also black and yellow, also use the descaling king to clean.

  2. Anonymous users2024-01-23

    There is a cheap sewage removal method, which is very corrosive, which is used to decontaminate toilets.

    It's kind of like sulfuric acid or something.

  3. Anonymous users2024-01-22

    Use oxalic acid, the price is cheap, hit a bucket and sprinkle it on the ground, soak it for a while and rinse it with water, you can also brush it with a brush, and you can do it a few more times.

  4. Anonymous users2024-01-21

    How about trying Mr. Wittmann? Spray the solution on the area that needs to be cleaned, then take the old newspaper and wipe it slowly, and when the dirt is reduced, wipe it with a clean damp linen cloth, and the effect should appear in front of you immediately.

  5. Anonymous users2024-01-20

    You can use a clean rag dipped in some old-fashioned decontamination powder to wipe hard, do not wipe with steel wool balls, otherwise the protective layer on the surface of the tile will be wiped off, and the tile can only be changed in the future, and after wiping with a soft cloth, a transparent waterproof layer is coated on the surface of the tile, and it will not be black again in the future.

  6. Anonymous users2024-01-19

    It can be removed very clean with solid powder, and it only costs five or six yuan for a bottle on the market.

  7. Anonymous users2024-01-18

    It is nothing more than some water-stained deposits containing calcium and magnesium ions, which can be disposed of by ordinary toilet cleaners with weak acids.

  8. Anonymous users2024-01-17

    Try putting a wire brush on stockings and washing with toilet cleaner or hydrochloric acid. This is a method that is seen on bus TV, and it is said to work.

Related questions
5 answers2024-08-20

I remove the embroidery! Brush with silver powder!! Then paint it.

9 answers2024-08-20

The total length of the wall circumference multiplied by the height of the room minus (the area of the doors and windows) is the total area, which is the area where tiles are used, but during construction, the area of doors and windows is included, and the area of floor tiles is the length x width of the space.

2 answers2024-08-20

1. After multiplying the height of all the doors, the opening area of the door and window is subtracted, and the small side area of the door and window opening should be added. All of them should be added to the total loss, and the good quality should be increased by 4%, and the poor quality should be increased by 5-8%.

2 answers2024-08-20

ma of more days and months and years t

9 answers2024-08-20

To illustrate this more straightforwardly:

The floor of my toilet is 2 meters long, 2 meters wide, 3 meters high, the toilet floor area is 4 square meters, the wall area = 18 square meters - the area of the toilet door - the area of the toilet window, and the wall is only 16 square meters. >>>More