What are the tips for cleaning kitchen sink drains

Clause.

1. Usually, the clogged sink is mostly due to the accumulation of debris at the U-shaped bend of the sewer pipe, resulting in poor drainage. If it is a sewer pipe with a sewage screw, remove it directly (to prevent staining the cabinet, it is best to pad a sewage basin at the bottom), after removing, dredge it with iron wire and steel wire, and it should be able to solve it smoothly. If it has not been solved, it may be necessary to remove all the sewer pipes, remove all the plastic connections, rinse them, and reassemble them, which I believe will not take more than 30 minutes to complete. >>>More

1. Manual entry method: for parallel flues larger than 40 cm square, they can be manually drilled into for cleaning, this method is labor-intensive, and it is necessary to pay attention to strengthening ventilation and equipping low-voltage (36 volts) lighting power supply. >>>More

1. Size.

The choice of size is very important, if you buy a sink that is not suitable for installation, it is time-consuming and laborious, so measure the width of the cabinet before buying, and then subtract 10cm, which is the maximum width of the sink, and it is also a more suitable width. >>>More

Generally speaking, wrap it in the same material as the surrounding area; This approach is more natural and not abrupt. >>>More

1.Tight welding, no false welding. Welding quality is the most critical factor affecting the life of the sink, and good welding can prevent raw embroidery and desoldering. This is in the case of double slots. >>>More