-
Anonymous users2024-01-231. Manual entry method: for parallel flues larger than 40 cm square, they can be manually drilled into for cleaning, this method is labor-intensive, and it is necessary to pay attention to strengthening ventilation and equipping low-voltage (36 volts) lighting power supply.
2. Disassembly method: When the flue is less than 40 cm square, this method is used when manual access is inaccessible. This method is the most thorough and effective way to clean, but it is difficult to construct, requires a large amount of work, and is relatively expensive.
The flue cleaning scheme is: according to the actual situation of the flue, the technician calculates that a section of the flue is disassembled at certain distances and extended to clean in both directions to ensure thorough cleaning and ensure the quality of cleaning.
3. Hole opening method:
This method is relatively easy than the disassembly method, and the cost is relatively low, and this method is adopted for the flue that can not be entered manually and is difficult to disassemble, and the separation distance, the position of the opening, the size and the number of holes that need to be opened are calculated by the technician, and the flue is cleaned in the flue through these holes. Finally, each hole is sealed.
4. Machinery and equipment cleaning method: this method is the easiest to do, the least difficult, the least workload, the lowest cost of flue cleaning, for less oil pollution, short cleaning cycle of the flue using this method to clean, first spray the pipeline cleaning agent to soften the oil, and then use a 30-meter-long electric flexible shaft brush to clean the oil. This method is used in 30 cm square vertical flues, hidden small flues that cannot be accessed by humans and are inconvenient to disassemble.
This kind of oil is not easy to clean and easy to accumulate oil, so the cleaning cycle should be shortened.
5. Airborne method: This method is mainly used to clean the vertical flue more than 50 cm square, the technician first removes the top and bottom section of the pipeline, fixes the high-altitude safety rope above the flue, ties the safety belt, and the technician cleans the oil stain in the vertical flue from top to bottom. This method is more dangerous, more technical, more expensive, and has a good cleaning effect.
The cleaning methods of the hotel kitchen flue are classified into the following categories + 15311113112 of light dust environmental protection cleaning companies >>>More
Dish soap vinegar soaking method. Remove the extraction smoke leaves, soak them in a basin of warm water mixed with 3-5 drops of dish soap and 50 ml of vinegar, soak for 10-20 minutes, and then scrub with a clean rag. The shell and other parts are also cleaned with this solution. >>>More
First of all, all the dirt on the floor should be cleaned, and then the floor cleaner should be sprinkled on the floor tiles, and the stains on the floor should be rubbed clean with a waxing machine, and then the water-based wax should be poured on the clean mop, and the water-based wax should be evenly applied to the floor tiles. After waxing, let the floor tiles dry on their own, and only when the floor tiles are completely dry can we walk on them, or we can use a fan to assist in drying.
1. Artificial entry method.
If the flue at home is a parallel flue larger than 40 cm, then you can find a professional worker to drill into it to clean it, but the labor intensity of the manual entry method is relatively large. Therefore, it is necessary to pay attention to strengthening ventilation and must also be equipped with low-voltage lighting power supply. >>>More
1.First of all, vacuum at least once a week, taking care to remove the dust between the dead end structures. >>>More