-
First of all, polishing is very important, only after the polishing is good, after the primer is applied, wait for it to be completely dry, lightly polish it with fine sandpaper, and then spray the topcoat, preferably with clear coat!
-
The bottom is not dry, and the putty is not good.
The main causes of paint blistering are water salt penetration, water solvent penetration and other reasons. >>>More
There are many reasons why the primer on the furniture board is whitish, and there are probably these several: >>>More
Mr. Ma from Baoshan South Road called to say that the toilet at home could not be closed tightly for some reason, and he could only watch the water flow away. At Mr. Xiong's house in Baiyun District, the toilet switch could not be turned off and could not be used normally. There are also many citizens who report that the water bill has risen, but they don't know where the water leaks to. >>>More
It may be that the glue is applied unevenly.
In addition, when you apply the skin, the substrate glue should be evenly coated, and if there is unevenness, there will also be blistering. >>>More
It may be that the solid wood itself is not treated properly; Improper handling of the link can also easily cause mold on furniture, such as too few times of painting; When it is placed in a humid environment for a long time, it is not ventilated, and the air humidity reaches 65%, the mold can germinate and grow. Here's why: >>>More