How to do the secondary waterproofing of the bathroom

Updated on Bathroom 2024-08-21
2 answers
  1. Anonymous users2024-01-24

    In home decoration, waterproof engineering is particularly important, and if you are not serious, it will bring a lot of inconvenience to your life. For households, waterproofing mainly includes kitchens, bathrooms, balconies, balconies and walls that are susceptible to moisture. Problems such as leakage and mold caused by improper waterproofing will seriously affect life, and many families will suffer from it.

    Especially in the decoration of second-hand houses, the leakage of the secondary waterproof layer of the bathroom is very troublesome, so the waterproof project must be taken seriously.

    >1. Do waterproofing of second-hand housing bathrooms and try not to damage the original waterproof layer.

    In the decoration, some second-hand housing bathroom bathing facilities will be added and a variety of water and water pipelines will be rearranged or moved, which has seriously damaged the original waterproof layer of the building, but the waterproof construction has not been repaired or redone, so that the problem is only found after the leakage. The waterproofing layer is easily damaged when the floor is redecorated. If not repaired in time, leaks will occur in the future and affect the neighbourhood.

    Therefore, it is necessary to pay attention to the protection of the waterproof layer when decorating, and if it is accidentally damaged, it should be repaired in time to avoid leaving hidden dangers.

    >Fourth, the wall must be waterproof.

    The water will splash on the adjacent wall when bathing in the bathroom of the second-hand house, and if there is no protection of the waterproof layer, the adjacent wall and the opposite corner wall are prone to moisture and mildew. Therefore, be sure to do a good job of wall waterproofing before laying wall tiles. Generally, the wall should be waterproofed with a height of 30 cm in waterproofing treatment, but for non-load-bearing light walls, the entire wall should be waterproofed, at least meter high.

    In addition, it should be noted that the waterproofing of the wall adjacent to the shower location should also be meters high, and if a bathtub is used, the height of the wall waterproofing coating adjacent to the bathtub should also be higher than the upper edge of the bathtub.

    This article was published by Happiness 1 Rubik's Cube, June 19, 2018].

  2. Anonymous users2024-01-23

    The two waterproofing of the bathroom you mentioned should be the first time in the bathroom backfill pit, and the second time after the ground backfill leveling. Bathroom waterproofing, it is recommended to use mortar waterproofing agent, not only with the base surface pasted firmly, but also with high puncture strength, waterproof years can be the same life as the building, is now a commonly used material in home decoration waterproofing!

Related questions
3 answers2024-08-21

Now when buying a commercial house, even if it is a rough house, the developer will also waterproof the bathroom, but most owners will add a layer when decorating, which is called secondary waterproofing, to ensure that there will be no leaks due to waterproofing. So, how to do the toilet secondary waterproofing? What should I pay attention to when doing waterproof treatment? >>>More

1 answers2024-08-21

The second waterproofing shows that the first time is not done, the acrylic coating is excellent, the base surface should be cleaned before construction, and the construction is very important to use Guoerjia's three coats and one cloth.

14 answers2024-08-21

1. Open holes and install drainage pipes. We first need to make a hole in the main drain pipe in the bathroom, and then install the drain pipe. The mouth of the drainage pipe should be the same height as the original sunken layer waterproof layer, and the other end should be inserted into the main drainage pipeline, and the PVC glue should be used to bond firmly. >>>More

6 answers2024-08-21

After the new house is renovated, it is necessary to check whether the waterproofing is done well during acceptance. How to do the secondary waterproofing of the toilet in the new house? PChouse will take you to find out. >>>More

1 answers2024-08-21

Secondary drainage is a drainage method to prevent leakage of water pipes buried in the bathroom and water seepage from the floor to the owner's house downstairs. Because the toilet will leak into the caisson in the case of long-term use, and then accumulate in the caisson, the cement will more or less leak downstairs in the long-term soaking, and the secondary drainage just solves this problem. When decorating, the owner should pay attention to the water pipe laid in the room and it is best to seal it with asphalt, so that even if the interface position is not completely sealed during construction or has been used for a long time, it will not leak. >>>More