What causes a toilet bowl to keep leaking?

Mr. Ma from Baoshan South Road called to say that the toilet at home could not be closed tightly for some reason, and he could only watch the water flow away. At Mr. Xiong's house in Baiyun District, the toilet switch could not be turned off and could not be used normally. There are also many citizens who report that the water bill has risen, but they don't know where the water leaks to.

To find out the cause of a leaking toilet, there are three things that can be checked. "96811 convenience master Zeng analyzed: one is to detect the water tank accessories, if the water meter no longer runs after closing the triangle valve, it means that there is a problem with the water tank accessories.

The "core" in the tank is the main heart of the toilet, and it depends on it for water intake and drainage. Many water tank leaks are due to corrosion and aging of accessories: the sealing gasket is stiff and will not be sealed, the spring embroidery of the switch is not flexible, the water inlet valve cannot be automatically closed when it reaches a certain water level, the water level exceeds the drainage line, the switch fails, the sewage flows backwards, and the flush is not clean.

To solve this leakage problem, you don't need to replace the entire toilet, just change the "core" of the water tank.

There is also the bottom of the toilet that is leaking or clogged. Master Zeng went on to introduce that the bottom leakage makes the floor always wet, mostly due to moldy materials or the water outlet is not aligned with the nozzle and the seal is not done well. After a long time, the accessories are aging, and foreign objects fall on the base to block the toilet, which needs to be disassembled and reinstalled.

In addition, when the hose and the water tank interface leak or the filter does not enter the water, the hose is broken and aging, and the junction is not dense, it is good to replace it with a new hose.

When encountering problems such as toilet running, rising, dripping, and leaking, find a 96811 professional convenience master to come to the door for inspection and maintenance, and you don't have to worry about the "guerrillas" spending money in vain, and the after-sales service is guaranteed.

1. The material texture is poor. This reason is completely the manufacturer's cheating, and when this kind of problem is found, he directly asks the manufacturer to claim for replacement or complain to the 315 Association.

2. For the leakage of the toilet in the back row, it may be that the float in the tank is not buoyant enough. The buoyancy of the float is not enough, so that after the float is submerged in water, it still cannot turn off the inlet valve, so it leaks. For this type of toilet leakage, you have to change the float, and you can consult the manufacturer to choose what pressure float to choose.

3. The sealing bonnet cover of the drain valve is not tight. This may be caused by the material of the sealing valve cover, which generally does not occur when it is first used, but it will appear with a long period of use, such a toilet leakage, you need to change a sealing cover with a better material, and the production should be excellent.

4. If the water tank is leaking, you can take down the sewer core and clean up the scale, if it doesn't work again, it can be replaced: if the bottom of the toilet is leaking all over the place, the glass glue can not be used within 24 hours, or removed and reinstalled. If the float is leaking, see if the float is damaged, if yes, replace it, if not, take off the float, put glass glue on the float gasket, and install it.

Answer reason 1: The inlet valve does not have a filter. If there are too many impurities in the water, it will cause blockage to the sealing ring in the water inlet valve, so that the water inlet valve will not be closed when it is working. Due to the loose sealing of the joint, the water of the non-disposable formed drain valve flows into the toilet through the overflow pipe through the interface gap under the action of water pressure, resulting in water leakage.

If the sealing ring is not tightly matched with the pipe wall, the lifting inlet valve that can change the height freely will often cause reason 3 and the design of the water tank is not good. For example, when the water tank is discharged, the float and the float rod will affect the normal reset of the flap and cause water leakage. In addition, the float rod is too long, and the float is too large, which causes friction between the water tank wall, affects the free lifting of the float, and leads to seal failure and water leakage.

Reason 4: The float in the tank is not buoyant enough. Nowadays, many toilet tanks are small, so that although water can be saved, the buoyancy of the float is not enough, so that the float can not turn off the inlet valve after being flooded, so it leaks. In this case, the float will need to be changed, but before changing, calculate the pressure required by the float, and then choose what kind of float according to this.

Reason 5: Inferior material. Some manufacturers blindly reduce production costs, and choose inferior materials to cause cracking at the outlet of the water inlet valve and the water inlet pipe itself during injection molding, resulting in sealing failure, and the water in the water tank flows into the toilet through the overflow pipe of the drain valve, resulting in "long flowing water".