-
Anonymous users2024-01-24This is a normal phenomenon, not tripping to indicate that there is a problem The socket circuit passes through the leakage circuit breaker, and the lighting circuit generally does not pass through the leakage circuit breaker, when you wire the bath bomb to work, the current flows from the live wire through the leakage circuit breaker but does not flow through the leakage circuit breaker again from the zero line (the current flows back through another zero line), at this time, as long as the current exceeds 30mA, the leakage circuit breaker will trip in seconds. Because in a home where a leakage protector is installed, the current of the live wire and the neutral wire is equal in order to supply power normally. If one end of the bulb is connected to the live wire, and the other end is not connected to the neutral wire, but to the ground wire, then the live wire and the ground wire have current, and the neutral wire has no current.
AS LONG AS THE CURRENT DIFFERENCE BETWEEN THE LIVE WIRE AND THE NEUTRAL WIRE IS 30MA, THE LEAKAGE PROTECTOR WILL TRIP. You need to remove the ground wire of the bulb and connect it to the neutral wire for lighting, and it will be back to normal. Special emphasis added:
It can only be connected to the zero line dedicated to lighting, and if it is connected to the zero line dedicated to the socket, it will still trip. The same principle is the same as above. In addition, it is very dangerous to use a light bulb connected to the ground by fire, and there are hidden dangers to yourself and others, and the power department is also strictly prohibited.
Solution: Do not move the original live wire, connect the neutral wire connected to the socket to the neutral line of the lighting line! If you can't find the zero wire of the lighting, then you don't move the zero wire that has been connected to the socket, remove the original live wire and connect the live wire of the socket to the switch and then connect the lighting!
It should be your home, if it was not leaking for a long time before, and it was only recently built, the pipe leakage may be relatively small. If it is a new building, you can test the water in this way: all the pipes are water, 1 two days later to see if there is a leak downstairs or the latest leakage, if not, it is not a problem with the pipeline! >>>More
The main reason is that the bathroom waterproofing is not done well or is destroyed by other types of work after it is done, and the other is that the ground slope of the bathroom slopes to both sides.
Upstairs responsibility, no matter how many times he repairs, in the end to ensure that no more water leakage down, can also find someone to suppress, from the description, the upstairs water pipe leakage probability is very high, more information, better advice, free concrete waterproof and leakage repair technical advice, free repair today, tomorrow leakage, repair every year, leak every year of trouble me.
The core of the question is: whose water is leaking?
1) If the source of this water is upstairs neighbor's, then upstairs is definitely responsible. This is due to the destruction of the waterproofing layer on the upper floor, which leaks downstairs. >>>More
You can find the property first, and the community neighborhood committee will do the work for him to repair, if it doesn't work, find the local news media to expose it, and if it doesn't work, go to the court to sue.