-
Anonymous users2024-01-24Mortar waterproofing agent for the wall, easy to paste tiles, not hollow.
The first layer of brushed plain mortar with a thickness of 2 mm, and the second layer of mortar waterproof layer with a thickness of 8 mm.
2. The ground is constructed with K11 waterproof slurry, which is very good for the construction effect of the pipeline periphery and yin and yang corners.
Brush directly 2 times with a thickness of 1 mm.
The waterproof height of the wall should be at least one meter high, and it is recommended to do the full height if possible, and if it is close to the bedroom, it is recommended to do the full height by the wall of the bedroom.
The waterproofing of the bathroom is done twice, once before backfilling (after the pipe is modified), the main purpose is to prevent the pipe from bursting and generating a large amount of water seepage. The waterproofing after backfilling is carried out after the water and electricity are completed (before tiling), the main purpose is to prevent the water from leaking down, and also to prevent moisture from eroding the wall and causing mold. Hahahaha.
Now when buying a commercial house, even if it is a rough house, the developer will also waterproof the bathroom, but most owners will add a layer when decorating, which is called secondary waterproofing, to ensure that there will be no leaks due to waterproofing. So, how to do the toilet secondary waterproofing? What should I pay attention to when doing waterproof treatment? >>>More
Of course, we must pay attention to the quality of waterproofing, and it is very troublesome to maintain it in the later stage!
It can only be sold to Wang Yuanbao and recycled at half price. If it is advanced, it is recommended to continue using it. Used furniture cannot be set up in stalls and cannot be traded with players.
After the new house is renovated, it is necessary to check whether the waterproofing is done well during acceptance. How to do the secondary waterproofing of the toilet in the new house? PChouse will take you to find out. >>>More
Now tile adhesive is used for tiling, and it is very firm. You can use sand cement to paste the bricks for the first time, and you can add a little adhesive appropriately, so as to ensure the adhesion and not to eradicate the difficult situation in the next construction!