There are water traces on the wall around the bathroom, and it s okay downstairs, what s going on

The main reason is that the bathroom waterproofing is not done well or is destroyed by other types of work after it is done, and the other is that the ground slope of the bathroom slopes to both sides.

Wei bai

Problems such as dampness, peeling, and water stains on the partition wall are mostly caused by water leakage in the bathroom.

Inside, the first thing that needs to be found is the cause of the leakage in the bathroom

1. Find a professional hydropower worker to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it is necessary to repair the pipeline in time to solve the water leakage problem;

2. If there is no problem with the pipeline, then it is considered that the waterproof layer is not done well and the water leakage is not done, if the local water leakage is serious, it is recommended to re-do the waterproofing with the kitchen and bathroom waterproof slurry, so as to fundamentally solve the problem.

Toilet is a combination of toilet, toilet, and bath. Residential bathrooms are generally divided into dedicated and communal. The dedicated one serves only the master bedroom; The common ones are connected to the public walkways and are shared by other family members and guests.

According to the layout, it can be divided into three types: independent, dual-purpose and eclectic. According to the form, it can be divided into semi-open, open and closed. At present, it is more popular to distinguish between dry and wet partitions.

This is typical of wall seepage. After the toilet uses water, the water seeps out from the junction between the wall and the floor. Even if you don't turn off the water valve, as long as you don't use water in the bathroom for a few days, the ground outside will dry.

The newly renovated room baizi should be brushed to the waterproof.

Bit du, wall one.

Zhi is generally brushed to one meter eight dao high, if the inner fruit wall is not brushed waterproof, the tile gap is not hooked to hook the place, there is a transparent waterproof liquid on the market, brush twice. If it has been brushed waterproof, look at the water seepage wall, whether there is a faucet, or a water mixer with a shower. See if the water mixer or faucet and the water pipe outlet are not screwed properly, and the water seeps out of the wall at the interface along the water pipe groove.

Use a rag dipped in some white vinegar, or buy the kind that is about 10-15 yuan a bottle (spray), spray the detergent on the stain, and then wipe it with a cloth, which is clean and trouble-free.