Can I use the new toilet right away?

1. The newly installed toilet bowl is covered with glass glue and sealant, and it can only be used until the glue is dry (1-2 days), otherwise the sealant will be damaged and leaked.

2. The toilet and the shower are very close to each other, and there is no big problem with the water splashing on the toilet.

3. If the temperature of the newly installed toilet is low in winter, it will take two or three days to use. Like in the summer, when the weather is hot, a day is fine. The main reason is that the flush will destroy the solidification of the glass glue.

Under normal circumstances, you can sit down steadily for 10 hours without shaking. If it is a neutral glue, it will dry more slowly, taking 24 hours. A better quick-drying acidic glue dries faster.

So if you want to use it as soon as possible, choose a quick-drying glue, and keep the floor flat and ventilated.

No, if you have glass glue, it is best to use it after 48 hours, if it is not glass glue, it is generally 24 hours.

In winter, when it's cold, it takes two or three days to use, and when it's hot, one day is fine....The main reason is that the flush will destroy the solidification of the glass glue. After the decoration materials are dry, at least 3 days, otherwise they will be uneven.

If the newly installed toilet has an odor, it may be that the sewage in the sewer pipe has not been flushed or the sealant has not been properly installed when the toilet is installed. But there is another reason, that is, the toilet itself is not odor-proof, which is very unlikely, because the toilets on the market are basically odor-proof. The solution is to clean the bathroom thoroughly and then check that the sealant on the interface between the toilet and the floor tile is not ready.

It is possible that the construction personnel relieved their hands nearby during the construction, resulting in dirt being sucked into the ceramic body, and then the sealing ring of the lower spout was not sealed well when the toilet was installed, or it may not be sealed, resulting in the leakage of odor in the sewer pipe; Or maybe the glaze of the toilet bowl is not very good? Specifically, you need to ask the installer what is the situation, the smell will not dissipate for a long time; There is also whether the height of the water seal in the toilet is not enough, resulting in the leakage of odors.

Answer: Whether the toilet can be used on the same day depends on the installation method of the toilet. The installation method depends on the bottom structure of the toilet and the size of the toilet toilet. At present, the bottom of the brand's bedpan is flat, and the area is large enough to be placed on the ground very smoothly.

When installing, the defecation pipe at the bottom of the toilet plus the gasket is directly inserted into the toilet bowel pipe, and then the bottom can be coated with a circle of glass glue. Well, such a newly installed toilet is ready for immediate use. Whereas, the old-fashioned toilet has a small bottom and an unstable center of gravity.

When installing, it should be glued to the ground with cement. Then, this kind of toilet cannot be used immediately, and can only be used after the cement has solidified. Otherwise, the cement will crack.

It is best not to use it immediately, mainly because the interface of the toilet sewer pipe will generally be filled with some glass glue, and it should be waited for it to dry thoroughly, so as not to leak in the future and leave hidden dangers; The edge of the toilet bowl and the seam of the noodles are usually sealed with some glue, and it is necessary to wait for it to dry through, and do not sit on it to put pressure on the place for the time being. However, according to this season, half a day if it is fast, and one day is enough if it is a little longer, and it can be completely dry.

After two hours, you can pour water If you sit, at least 10 hours, it depends on whether the ground is flat, whether there is a warped place, whether the ventilation is good, and what glue is scored, the above can reach 10 hours, but you must sit steadily, you can't shake, if it is a neutral glue, it will dry slowly, 24 hours, and a good quick-drying acidic glue will dry quickly.

No.. Because the glass glue will take at least 2 days or so to dry.

24 hours later

The newly installed toilet is ready for use after 24 hours of ventilation in the toilet. The first step in installing the toilet is to check the dredging of the sewage pipeline, so that the installation of the subsequent toilet will play the most fundamental guarantee, and the inspection of the sewage pipe is to prevent the blockage of the pipe after the installation of the toilet, resulting in the problem of frequent congestion of the toilet.

Not necessarily, if it is a sticky porcelain treasure, you can use it immediately. If you use glass glue or glass glue and viscose porcelain at the same time, it will take 24 to 48 hours to use.