How to deal with the problem of leakage in the bathroom tile joint

Ceramic tiles are generally not leaky, if the tile joint is leaking, you can choose waterproof putty powder for hooking or using mildew-proof acetone glue and other waterproof materials to fill the joint, the key is the process, to do beautiful.

Leakage from the toilet sewer pipe is caused by the original waterproof infill seal is not in place. When there is a leak in the toilet drain, you can either take the method of repairing from the front surface or choose the inverted plugging method. In contrast, the latter is more affordable.

Let's analyze the causes of water leakage and solutions!

1) Causes of toilet leakage: There are two reasons for toilet leakage, the first is ground water seepage, and the second is water seepage from the upper and lower water pipes.

2) How to judge the cause of water leakage: the method of judging the ground water seepage: as long as the ground uses water, there is water leakage downstairs, and when the ground does not use water, the downstairs no longer leaks water; Methods for judging leaking water from water pipes:

Generally, the leakage of water pipes is large and continuous; If the toilet has not used water for several days, but there is still leakage, and the leakage water is not reduced, it is a problem with the water pipe.

3) Repair method of leakage water on the floor of the bathroom (note: as long as the water pipe is not broken, you can ensure that the problem of water seepage on the ground can be solved with this method):

1. Treat the dust, oil, and water on the surface, and keep the surface dry;

2. If the tile joint is filled with caulk, you need to use a knife to draw a small groove;

3. In the cement parts such as tile surface, tile joint, wall joint, pipe root, etc., spray permeable waterproofing agent, and be sure to spray evenly;

4. After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints and damaged and defective parts with caulking paste, and the weak links around the pipe root are reinforced;

5. The connection between the ground and the wall and the pipe root are made of plastic steel mud as a waterproof edge;

6. After the waterproof construction is completed, the construction site cannot be drenched with water within 24 hours. Here's a warm reminder: the waterproof treatment of the toilet sewer pipe belongs to the detailed construction, and when the waterproof construction is carried out, it is necessary to carry out embedded sealing and additional enhancement treatment on the part, so that the waterproofing of the part can meet the expansion and contraction of different materials due to factors such as temperature.