Why does the surface crack in the use of parquet

Now the family argues that there are more heating floor heating, the solid wood floor can not be paved, and the cost is high, the environmental protection and deformation resistance of the laminate floor are worse than the multi-layer solid wood floor, and the reinforced composite surface is wear-resistant paper, which is not as good as the solid wood layer on the multi-layer solid wood. Moreover, the foot feeling of solid wood multi-layer shed-god floor is also better than that of reinforced composite and sensitive, and it is still a cost-effective wood floor. However, the disadvantage is that the wear resistance is poorer, and it is more used in the bedroom.

The maintenance of parquet is much simpler than that of solid wood flooring, and the following points should be paid attention to in daily use and maintenance: 1. Keep the floor dry and clean, and do not mop the floor with a dripping mop, or wipe the floor with alkaline water or soapy water, so as not to damage the gloss of the paint surface; If the air in your home is dry, make the mop wetter or put a basin of water on the heater or humidify it with a humidifier. 2. Try to avoid sun exposure, so as to avoid long-term aging and cracking of surface paint under ultraviolet radiation; 3 If there is oil stains, you can use a rag dipped in warm water to scrub with a small amount of laundry detergent, if it is a drug or pigment, it must be removed before the stain penetrates into the wood surface; 4. Try to avoid long-term contact with water, especially not with hot water, so once there is hot water sprinkled on the floor, wipe it dry in time; 5 It is best to wax every three months, and clean the stains on the surface of the floor before waxing. >>>More

There are generally three kinds of thickness of parquet, 12mm, 15mm, 18mm, and the most used is 15mm, so that the board is visually close to the solid wood floor, and the foot feeling is better.

If the surface of solid wood can be cleared to see the wood grain, the laminate floor texture is pasted with a layer of paper, and you can see the reverse side and cross-section. Composite panels are glued together with sawdust and some other things.

Look at what floor to compare, parquet is the so-called laminate flooring, and the real solid wood floor is different, the base layer of the laminate floor is made of wood pulp, the so-called wood pulp is formed by beating the raw wood into powder and adding glue, after high temperature and high pressure treatment, it forms the floor base you see. The surface of the laminate flooring is not really veneer, as long as the aluminum oxide wear-resistant paper, the real wood grain is printed on the floor through photographic technology. >>>More