Can the leakage around the glass shower room be solved by plugging the leak?

Updated on Shower room 2024-08-17
1 answers
  1. Anonymous users2024-01-24

    Plugging King is a fast-drying and water-stopping product, which can be blocked, but it will crack after a short period of use.

Related questions
1 answers2024-08-17

There should be no water leakage, but waterproofing must be carried out in accordance with the work process, regardless of the leakage and non-leakage at that time, the closed water test should be done, and the water leakage within 24 hours can be determined to be qualified, and the next step can only be carried out after reaching the qualification.

1 answers2024-08-17

BATHROOM WATERPROOFING IS A VERY IMPORTANT PROCESS, THE HOUSE IN THE BUILDING HAS BEEN DONE BUILDING WATERPROOFING, THE WATERPROOF LAYER EXTENDS FROM THE GROUND TO THE WALL, 250MM HIGHER THAN THE GROUND ACCORDING TO THE CONVENTIONAL BATHROOM BY THE SHOWER HEAD WALL WATERPROOF LAYER HEIGHT SHALL NOT BE LESS THAN 1800MM, THE GENERAL THICKNESS SHALL NOT BE LESS THAN 1 5MM, AND THE WATERPROOF PROJECT MUST BE DONE AFTER THE END OF THE 24-HOUR WATER STORAGE EXPERIMENT. >>>More

1 answers2024-08-17

It can be cleaned with a professional marble cleaner, which can penetrate into the micropores of carbonate stones such as marble, limestone, dolomite, serpentine, etc., to remove a variety of yellow spots and stains such as tea, coffee, straw rope yellow, etc., without damaging the surface gloss of the stone, and will not leave pigment inside the stone. >>>More

1 answers2024-08-17

This problem can be closed with glass glue. It is best to use a long-lasting anti-mold one.

1 answers2024-08-17

The following is for reference.

OK. It is recommended to glue with mildew-proof neutral glass. >>>More