-
Anonymous users2024-01-24If it is an Opu bath bomb, then its size should be able to match the integrated ceiling. If the size is not matched, according to the installation size of the bath bomb, the integrated ceiling will be opened out of an opening, on the top of this opening, the wooden square should be hidden, and the bath bomb can be installed after the end of the ceiling, and the wooden square inside is used to screw it; If it is just a general lamp, such as a ceiling lamp, then when the ceiling is suspended, a wooden board is placed on the top surface of the installation of the lamp in advance, and this wooden board needs to be fixed, and then the lamp can be directly fixed to this wooden board with screws.
-
Anonymous users2024-01-23Whether it is surfaced or concealed, it is generally a wiring duct. It is most common to run trunking along walls and ceilings before shading ceilings.
Let's see what others have to say.
-
Anonymous users2024-01-22Whether it is surfaced or concealed, it is generally a wiring duct. It is most common to run trunking along walls and ceilings before shading ceilings.
The fashionable living room is very spacious, neat and neat atmosphere exudes here, the light-colored tiles are paved with the TV wall, and the outside is surrounded by gypsum board, adding a three-dimensional effect, as well as the combination of display shelves, classifying and storing some living objects and decorations, which is more abundant. >>>More
Integrated ceilings are often seen in bathrooms and kitchens, and are now widely used. It is not only beautiful, but also plays the role of sound insulation, heat insulation and so on. How to install an integrated ceiling? >>>More
1. Integrate the installation process of the ceiling drying rack. >>>More
Two schemes, 1: line to the ground, to the right height, reserve a light position or switch! 2: The line goes to the top surface, that is, the roof is slotted, the lower line pipe is threaded, and the lamp position and switch are reserved at the appropriate position!
It can be selected according to the following ways: laminated board, nano plate, roller coated board, frosted board, etc., the roll coated board is directly painted on the aluminum plate after a high temperature of 280 degrees, which is environmentally friendly and non-toxic (formaldehyde emission is 15 times lower than the national standard), and is not easy to change color. The laminated board is a layer of PUC film pasted with glue, one is not environmentally friendly (containing formaldehyde) and the other is discolored quickly (it will change color after two hours in the sun), so don't choose the laminated board. >>>More