-
Anonymous users2024-01-24The glass drill bit is safer, first gently drill through the glaze, and then use the side of the drill to spray some water with a mineral water bottle. As long as the tiles are installed, they must be equipped with expansion screws, showers and pendants, no different.
-
Anonymous users2024-01-23Use a pistol drill to break the tiles first (the drill bit requires a tile drill bit or a glass drill bit), and then use an electric drill to hit the wall. The same goes for hardware pendants!
It can be fixed with glass glue, and there is no need to worry about dropping. >>>More
Silicone sealant can be used for bonding, but there should be auxiliary means to prevent the glue from falling off when you don't dare. It's firm when it dries.
The floor of my own house is made of large and small eyes on the mother trough, and then screwed with good quality wood screws, and it has been 21 years now, which is quite good. The key is that the wooden flute below should be explained to the ground, and it should be solid and smooth. View the original post
The fixed bracket of the lifting shower can be used and placed on the vertical water pipe.
All the metal pipes, metal bathtubs, and metal faucets in the bathroom must be connected to a wire, if your home is not connected, there is a problem. See, there are wires in the picture below: