-
Anonymous users2024-01-24It can be fixed with glass glue, and there is no need to worry about dropping.
Make you good 793
3M can be pulled.
I often use these to put a background wall on someone's wall.
No problem! ~!
But put a glass tray under your wall.
with right-angled ones. Otherwise, it's been a long time.
No glue can withstand the weight of your glass.
-
Anonymous users2024-01-23The line is also on the 4th floor, and the glass glue can be.
My family sells decoration materials and engineering team (12 teams) I am engaged in the design of 793, this glass glue is so famous.
The one on the 4th floor is not Shandong, and the fastest one sold in my house is also 793, 10-15 yuan, and a bottle is OK.
If you want to change the mirror in the future, the wall will not leave anything clean.
-
Anonymous users2024-01-22There is a kind of nail for installing mirrors in the after-work product store, and it is enough to find a master to drill four holes in the mirror and then set the nail on the wall. You can also use glue, you can use glass glue, construction glue, but this glue solidifies relatively slowly, you have to apply the glue on the mirror first and then press it, fix it with tape first, and wait for the glue to dry the next day before you can take off the tape.
-
Anonymous users2024-01-21Glue the row, use neutral glass glue. If you don't pay attention to the acidic glass glue, then you will be miserable, at most 3 months, your mirror will become a flower face
Silicone sealant can be used for bonding, but there should be auxiliary means to prevent the glue from falling off when you don't dare. It's firm when it dries.
The hose can be fixed directly to the wall.
The water pipes used in daily life, whether they are hot water pipes or cold water pipes, have low water pressure, and the pressure capacity of the pipes used is also large enough that they will not be dangerous or affect the normal use if they are directly fixed on the wall. >>>More
The thing that holds the steel pipe to the wall is called a pipe clamp.
One is to use a nail gun to shoot nails, the disadvantage is that I am afraid that some tiles are not very full of cement when bonding, which is easy to cause tile cracking! The second is to use a percussion drill to drill holes, lower the plug or wooden wedge, and use self-tapping wire to fix the wooden keel, which is more labor-intensive!
First pour the white vinegar into a small basin, mix with the same amount of water, the amount of white vinegar and water should be determined according to the size of the mirror and the rag, in order to be able to soak the whole rag, the water does not drip down as well, do not screw, use this rag with white coarse water to wipe the mirror from top to bottom, wait for 1 minute, adjust the waiting time with the degree of water stain on the mirror. Then wash the vinegar rag with water, still don't twist it, just clean the vinegar water on the mirror.