-
Anonymous users2024-01-24This kind of waterproofing does not meet the requirements, and the phenomenon of hollowing is not good.
It is recommended to use environmentally friendly JS composite waterproof coating for toilet waterproofing.
-
Anonymous users2024-01-23Cut off all the hollow places with a knife, fill them with water without leakage, and re-brush the waterproof paint.
-
Anonymous users2024-01-22Nowadays, there are more waterproof coatings used for waterproofing in the bathroom, and the membranes are relatively small.
You do a good job of waterproofing and do a closed water test!
1. Due to the small area and many nozzles in the bathroom and kitchen, it is not suitable to use membrane waterproofing, because there are many interfaces of membrane waterproof materials, and there is a hidden danger of water leakage if it is not handled well. The correct approach should be to make a layer of waterproof mortar and then make a layer of paint on top of it waterproof, the coating can choose polyurethane waterproof coating or water-based polymer waterproof coating or other waterproof coatings. >>>More
Resurfacing floor tiles should be done to waterproof the floor. If you need to replace the original floor tiles in the bathroom, after chiseling off the original floor tiles, you must first level the ground with cement mortar, and then do waterproof treatment, so as to avoid leakage caused by uneven thickness of the waterproof coating. Before doing waterproofing, be sure to clean the ground and paint it 2 to 3 times with polyamide waterproof paint. >>>More
The main thing is to look at the waterproofness of the things you buy, choose waterproof coatings to see the quality, and do a 24-hour closed water test after waterproofing, which is the most important.
It is recommended to use mortar waterproofing agent or waterproof coating for the bathroom. >>>More
The water vapor in the raw room is often relatively large, especially those bathrooms that do not separate dry and wet, and are often surrounded by water vapor after showering, so the choice of bathroom ceiling must also pay attention to its moisture-proof performance. To do bathroom roof waterproofing, it is best to apply a layer of waterproof coating on the roof of the shed, and then use PVC gusset with better waterproof performance. When the new building is delivered, the bathroom is generally waterproofed, but most of the decoration will rearrange the water and water pipelines, which will destroy the original waterproof layer of the bathroom, so the waterproof layer of the bathroom must be redone when redecorated. >>>More