Leakage of sewage pipes in the toilet of the blank room, how to protect rights

Updated on Bathroom 2024-08-17
5 answers
  1. Anonymous users2024-01-24

    If your house is not decorated, there is no relevant procedures for house inspection, you can find the property and the developer, communicate with the relevant issues, the property will give you reasonable treatment advice according to the actual situation, if the property is just simply done some remedies [tarpaulin] It is difficult to meet the normal waterproof needs, you should be based on reasonable waterproof standards, let the property be re-processed to achieve qualification, if there is no decoration, it should be within the warranty period.

    If the property is always dragged like this, you can call every day, or say something like some complaints, and the property is most afraid of this kind of thing, as for the problem of compensation for water leakage downstairs, it depends on the actual damage, combined with the situation of the owner downstairs, to discuss the actual compensation plan. The general bathroom furniture is also water-resistant materials, should not be very serious, I think as long as the downstairs is good to speak, change is not negotiable, the last question is whether the property to repair the matter from the new calculation of the warranty period, if there is no decoration, in the same leakage, the property still has the obligation to warrant, do not need any repair certificate, it is estimated that you will not write it.

    Hope the above can help you.

  2. Anonymous users2024-01-23

    During the warranty period, the responsibility lies with the developer! If the other party does not deal with it, you can complain to the quality supervision station!

  3. Anonymous users2024-01-22

    First of all, find the cause of the water leakage, if it is a small hole or the joint is not connected, you can use stone glue or glass glue to repair, do not use water for 24 hours after repair, if the pipe is cracked, it is recommended to change the pipe.

    Check the water pipe leakage after completion:

    1. Test whether the inlet pipe is leaking.

    1) Write down the data from the water meter, and this time allows the upstairs not to use any water.

    2) Check it again after two or three hours.

    3) If it is a leak in the inlet pipe, it must be reflected on the water meter.

    2. Test whether the drain pipe is leaking.

    1) Turn off the sluice gates and drain all areas where there may be water.

    2) Find a water pipe to flush the floor drain and insist on it for a longer time to see if there will be water leakage downstairs.

    Note: Do not let any water flow outside the floor drain at this time so that it can be accurately tested.

    Whether there is a leaking drain problem.

    3. Waterproof layer leakage test.

    1) Close all the sluices.

    2) Drain all the water in the pipes.

    3) Do a closed water test upstairs for 24-48 hours to see if there will be water leakage downstairs.

  4. Anonymous users2024-01-21

    Supplement: The leakage water around the pipeline can be treated by inverted plugging method, which is more reliable for the quality of the waterproof company. It is recommended that you go to your local waterproofing company to see what is going on and ask them to find out why and how to do it.

    Then you reflect it to the property.

    What to do if there is a leak around the toilet sewer pipe.

    What is the approximate price of bathroom waterproofing.

    Also under warranty.

    Article 7 of the Ministry of Housing and Urban-Rural Development's "Measures for the Quality Warranty of Housing Construction Projects" stipulates that the leakage prevention of roof waterproof projects, toilets with waterproof requirements, rooms and external walls shall be 5 years.

  5. Anonymous users2024-01-20

    Don't be upset, you have to fix this at any time. Maybe it's because there are no pipes. After reading your presentation, all the questions are nothing.

    It's your waterproofing problem. Tarpaulin is the cheapest of the existing water-imitating methods, and it is very insecure, so don't forget to do it again when decorating.

Related questions
2 answers2024-08-17

Because the photo is too small and pasty, it is even more mushy when I zoom in, so I can only guess: the three short thick pipes seem to be drainage pipes.

6 answers2024-08-17

1. Base surface treatment:

Leveling, cleaning (no debris and dirt on the base surface), moist base surface. Pipe roots, floor drains, drains, yin and yang corners and other parts that are prone to leakage should be treated first. >>>More

4 answers2024-08-17

In the decoration process, the waterproof construction of the bathroom is a very critical step, because the water consumption of the bathroom is the most used place in the house, if the waterproofing is not done well, it will bring great inconvenience to the owner after moving in. Do the base leveling. Use polyurethanes, C, polymers, cement mortars, etc., similar to paints, when brushing waterproof for the first time. >>>More

1 answers2024-08-17

You can find a waterproofing master on the Internet.

1 answers2024-08-17

Chisel off the inferior waterproof layer, clean the base layer, and choose materials such as polyurethane to make the overall waterproof layer.