What tools do you need for DIY furniture when buying a house and decorating1 .

A wall cabinet designed and made by me to store books. The dimensions are: width * height * thickness (

A two-door cabinet designed and manufactured by me.

The dimensions are: width * height * thickness (

Designed and produced by me.

Three-door cabinet being installed.

The dimensions are: width * height * thickness (the above design, the surface trim panel is red oak, the interior panel is ash, and the interior is 16mm or 25mm thick Xiangshan finger joint board; Red beech wood edging with self-toning giraffe polyester paint.

If you really want to DIY furniture by yourself, what tools do you need? In my practical experience, at least the following tools are required.

1. Computer. Laptop or desktop computer. It is mainly used to search for furniture pictures that you like and have been developed by others, and more importantly, you should use AUTOCAD mechanical design software. In this way, you can imitate the appearance of furniture pictures found by searching on the Internet, and use AUTOCAD mechanical design software to design your own personalized furniture drawings.

Of course, you can also go to a bookstore to buy drawings or go to a furniture store to take a picture of the appearance of your favorite furniture with your camera, and then use AUTOCAD mechanical design software to design it accurately.

2. Portable woodworking electric planer.

It is used for rough planing of the surface of wooden fangs and planks. Generally hand-held processing when the surface size error is about about 200mm, when the length of the processed wood fang, the wooden board is greater than 200mm, in order to ensure that the surface flatness of the wood workpiece is obtained, you have to try to fix the portable woodworking electric planer upside down on an operating wooden table, and the size error can be obtained on the surface of the processed wood at this time is less than.

3. Hand planer.

It is a necessary tool to supplement the use of woodworking electric planers, and the short coarse planer processing pushes the size between each time, and the long fine planer processing pushes the size between each time.

4. Hand-held chainsaw.

It is used for rough sawing of wooden fangs and planks. The size error of rough sawing when hand-held electric saw is above, even if the operating bench is fixed, there is little difference, especially the multi-layer splint with poor cutting quality, when the large core board, the processed plate has the phenomenon of falling off, and some boards will have burrs greater than 10mm. 5. Hand drill.

It is used to open round holes, and when the diameter is greater than 15mm, a woodworking drill bit is used. (To be continued).