-
Anonymous users2024-01-24Look for the top of the total range of the water inlet valve, there is a "ten" gong cap, and there will be more water when you turn it around, and less water when you turn it around. Just don't fill the overflow hole.
Open the lid of the water tank, there is a device that can adjust the height of the water level, and the water level can be adjusted lower. In addition, you can also find a drink bottle, fill it with water and put it in the water tank, which can also reduce the amount of water in the water tank.
The drain valve is broken, how much water is in, how much water is discharged, so the water can't be stored, just change the drain valve.
1. If the blockage is not very tight, go to the supermarket to buy a rubber suction for the toilet, and press it back and forth on the toilet bowl a few times, so that it is easier to pass when it is full of water >>>More
Because it has a device in it that maintains a constant pressure. So the water stored is the same every time. It has nothing to do with the floor. Ordinary ones don't have this effect.
Adjust the water level in the toilet bowl to lower the method: to lower the water level in the pit, open the water inlet valve on the left side of the water tank cover with 1 and a thin leather pipe called the water supply pipe, generally plugged into the drain valve on the right, pull the right side up and pull it directly in the water tank, so that the pit will not be too high when the water enters the water next time. >>>More