How to adjust the water in the toilet pit a little less

Updated on Toilet 2024-04-07
3 answers
  1. Anonymous users2024-01-23

    Adjust the water level in the toilet bowl to lower the method: to lower the water level in the pit, open the water inlet valve on the left side of the water tank cover with 1 and a thin leather pipe called the water supply pipe, generally plugged into the drain valve on the right, pull the right side up and pull it directly in the water tank, so that the pit will not be too high when the water enters the water next time.

    First, the standard of toilet squatting distance.

    To choose a toilet, you must first choose the right pit distance.

    The pit distance refers to the distance between the toilet and the center of the sewer, that is, the positioning size of the toilet drain, which generally has specifications such as 30cm, 35cm, 40cm, and 45cm. Squatting distance is the key and basis for choosing a toilet, and most families need to choose a pit distance of 30cm or 40cm according to the type of bathroom room and personal preferences.

    During the renovation process, the toilet pit will be reserved for 2cm, which is the distance between the reserved wall tiles, so the distance from the center line of the sewer outlet to the wall when installing the toilet is actually 32cm or 42cm. If you buy it according to your favorite style, you can keep it within 1cm when installing.

  2. Anonymous users2024-01-22

    This is a flaw in the design and is prone to splashing water when used. There is no way to adjust, the solution: first, you can use a small bucket of water to flush down the front of the toilet, and with a bang, the water will fall, and only some water is left at the mouth of the pit (enough to isolate the odor).

    The second is to use a clean leather pouch twice before using the toilet, and the water will go down a little.

  3. Anonymous users2024-01-21

    I prevent aftertaste, and I don't need to adjust it!

Related questions
6 answers2024-04-07

The toilet is clogged and there is no water at all; The toilet is clogged, usually at the drain bend, and the best and easiest way is... >>>More

1 answers2024-04-07

The situation you're talking about is definitely convection, because when you open the window. The cool breeze from outside him would surely come into the house. The heat will also escape. This is also called convection of hot and cold air.

4 answers2024-04-07

It is recommended to go to the supermarket to buy toilet unclogging agent, and follow the instructions to use it. Give it a try.

2 answers2024-04-07

Another way to try the leather of the toilet bowl is to roll up the mop and stuff it into the hole, then pull it out and repeat it several times. Flush more or report for repair.

1 answers2024-04-07

Oxalic acid, daily miscellaneous, hardware stores are sold, two or three yuan a bottle, (the kind of bottle that hangs water in the hospital) poured into the toilet and waited for ten minutes to flush with water. Note: Do not dilute with water first, if you have a chemical taste, please turn on the exhaust fan. >>>More