-
Anonymous users2024-01-24The waterproof coating itself has no adhesion, but it can be better bonded with the binder, so the polishing tile still needs to be brushed with the binder.
-
Anonymous users2024-01-23Generally, in the actual construction, it is recommended to make a protective layer of mortar after the bathroom is painted with waterproof coating, so that the strength of the waterproof layer is higher and it is not easy to be punctured after construction. For the follow-up tiling work, it is recommended to use tile adhesive directly on the cement-based surface to attach it, and the construction does not need to be coated with glue to increase the adhesion force according to the product instructions.
It is enough to do a layer of brushing effect, for many reasons, such as the type of paint, or the mixing of cement and sand.
Not feasible, it needs to be painted twice.
Bathroom waterproofing process: >>>More
It is best to hang a layer of glass lead mesh for better results.
Two coatings for waterproofing toilets.
Nowadays, the materials used for waterproofing are generally paints, and asphalt-based waterproofing coatings are basically not used. Here are two coatings commonly used for waterproofing in the bathroom. >>>More
1. All the waterproof layer is generally dry for 24 hours, but there are slight differences due to different seasons, temperatures, and ventilation conditions, and the waterproof layer is dried for 48 to 72 hours after the closed water experiment, and there is no problem after you can paste the bricks.