-
Anonymous users2024-01-24Sanitary partition floor covering.
The ground should be made of waterproof, dirt-resistant, non-slip granite, etc., the height should be 10---20mm lower than other ground, and the floor drain should be about 10mm lower than 10mm to facilitate drainage.
Sanitary partition top surface material.
The top surface is affected by water vapor and is most prone to mold, so it is better to use waterproof and heat-resistant materials. Generally, colorful aluminum gusset and acrylic molding ceiling are used, these materials have strong water resistance, and the surface is pasted with thermal insulation materials, which is an ideal material for bathroom ceilings, and the specifications are mainly 120mm wide strips and 300mm*300mm squares, and the surface structure has two kinds of flat and micro-hollow. Acrylic molded ceilings are less expensive but prone to aging; The price of colorful molded aluminum gusset is higher, but the color is diverse and durable, and it is the main material used in modern bathroom ceilings.
In addition, there are also aluminum-plastic panels or calcium silicate panels, the latter is coated with cement paint, which is lower in price and more waterproof.
Sanitary partition wall coverings.
Bathrooms have the largest wall area, so they must be made of materials that are waterproof and resistant to corrosion and mildew. Easy to clean tiles, marble, mosaics and other colors, can collage rich patterns, and smooth and easy to dry, is a very practical wall material, but pay attention to the color of the ground material unity. For example, the sanitary partition of metal materials, in addition to being waterproof, the sanitary partition of this kind of material has many other advantages.
As. Lightweight, energy-saving, easy to install, maintain and recyclable;High strength, good stiffness, not easy to deform, large load; Even if it is impacted by external forces, it can maintain its shape and is not easy to change
Good sound insulation, heat preservation, heat insulation, moisture-proof, fireproof effect, non-toxic, environmental protection; And many more.
-
Anonymous users2024-01-23If you want to achieve dry and wet partitions in the bathroom, you can use tempered glass as a partition or light steel keel as a structure, gypsum board veneer and tiles on the outside, if you just want to play the space partition between the shower area and the toilet in the bathroom, it is good to use a soft partition in a small space, which is convenient and will not take up too much space.
Can you understand and understand this?
Sanitary partition is a humid environment, it is best to use tempered glass partition, with a small amount of aluminum alloy and plastic steel frame!
Windowless balcony window purchase common sense.
Kitchen socket installation height requirements. >>>More
It can be built with red bricks, painted with cement mortar, and then pasted with tiles.
Bathroom partition wall covering: tile, marble The bathroom has the largest wall area, and it is necessary to choose materials that are waterproof, corrosion and mildew resistant. Easy to clean tiles, marble, mosaics and other colors, can collage rich patterns, and smooth and easy to dry, is a very practical wall material, but pay attention to the color of the ground material unity. >>>More
If the space is relatively small, you can consider using a shower curtain in the rain area, which can not only block water, but also have a flexible space.