What problems do you need to pay attention to in the gypsum board ceiling in the living room?

The main problems that need to be paid attention to in the construction of gypsum board ceiling engineering are as follows:

1. Before construction, the net height of the house and the special height of the ceiling should be made to make the elevation line belong to determine the relevant height of the ceiling;

2. The wooden boom, wooden keel or wood veneer that fixes the gypsum board must be fireproof;

3. The embedded parts, steel bar boom and section steel boom of the ceiling project should be treated with anti-rust;

4. The distance between the boom and the end of the main keel shall not be greater than 300mm, and when it is greater than 300mm, the boom shall be added. When the length of the boom is larger, the counter-support should be set. When the boom meets the equipment, the boom should be adjusted and added;

5. Heavy lamps, electric rooms and other heavy equipment are strictly forbidden to be installed on the keel of the ceiling project;

6. The joints of gypsum board should be treated with anti-cracking treatment according to its construction technology standards. When installing double-layer gypsum board, the joints between the surface layer board and the base board should be staggered, and the joints should not be made on the same keel;

7. The position of the lamps and lanterns on the veneer, smoke detector, sprinkler head, tuyere and other equipment should be reasonable and beautiful, and the handover of the veneer should be consistent and strict;

Only violent demolition, but try not to break the plasterboard.

Because the gypsum line is glued to the quick-adhesive stone plaster, it will be attached to the wall and gypsum board, and the gypsum board will definitely stand down when dismantling, and the secondary maintenance of the wall and gypsum board will be done after the demolition.