-
Stainless steel nails are the best, they can't be fake. NOW, IT IS GENERALLY USED TO PHOSPHATE SCREWS, FIRST BRUSH THE ANTI-CONCOCTION PAINT, AND THEN USE THE BLACK CEMENT COVER WILL NOT BE RESONANT, AND THE NAILS MUST BE 1-2MM LOWER THAN GYPSUM BOARD
-
Now you only need to use black cement a little, and you don't need to buy stainless steel rose (fake stainless steel is troublesome).
-
If the conditions are good, you can use stainless steel nails, generally with cotton screws, and there is a black cement cover!
Yes, it depends on what kind of screw you use.
Generally, screws are coated with anti-rust paint, but there are screws on the market that do not rust without anti-rust paint, but it is better to paint them with more insurance. >>>More
Do not put the electroplated furniture in a damp place, and do not wipe the electroplated furniture with a damp cloth. When washing the surface of the plated folding chair or sofa with soapy water or laundry detergent water, try not to wet the metal plated parts. Otherwise, the plating and lacquer parts are prone to peeling and rusting.
There are many reasons for the cracking of suspended ceilings, such as carpentry >>>More
Thoroughly clean and remove rust from the pipeline, and brush with rust and anti-rust primer. Then brush the top coat of your favorite alkyd enamel. And keep the surface of the pipe dry, splash water stains and wipe them dry in time.
The bathroom is very humid because of the frequent use of water, so it is best to keep it ventilated at all times.