Midea Electric Pressure Cooker How to use kitchen appliances correctly

Midea pressure cooker, Midea rice cooker, Midea juicer, Midea soybean milk machine, Midea microwave oven, Midea induction cooker, ......These dazzling small household appliances enrich the kitchen production and greatly reduce people's labor intensity. However, professionals also remind consumers that they should pay attention to the following aspects when using these small household appliances: 1. Try to place electrical appliances in a ventilated place, and the electrical appliances should be separated from each other at a certain distance to facilitate heat dissipation.

It is very wrong to place the electric pressure cooker on the refrigerator, the electric pressure cooker is easy to produce water vapor during use, and it is easy to short circuit and cause a fire when it comes into contact with the energized refrigerator. 2. Avoid humid environments. Moisture is very harmful to household appliances.

In order to ensure the long-term good electrical resistance and insulator insulation indicators of household appliances, it is recommended that you try to find a place for small household appliances that is relatively far away from water sources or other humid environments. 3. Safe to use. For most kitchen appliances, avoiding idling (such as juicers) and empty burning (such as microwave ovens, rice cookers) is the most important link when in use, and the appliances should be turned off and the power supply should be cut off immediately after use.

In this issue, I would like to share with you the tips for using the electric pressure cooker of the United States: 1. Hold the handle of the lid tightly with your hands, rotate the lid in a clockwise direction to the limit edge, and then lift the lid upward. 2. Remove the inner pot.

Put the food and water in the bottom of the pot; Food that is easy to expand in water should not exceed 3 5 of the height of the inner pot;Food and water shall not be less than 1 of the height of the inner pot, put the inner pot into the outer pot, wipe the inner pot and the heating plate clean before putting it in, and no sundries shall be placed in the outer pot and the surface of the heating plate; After inserting, rotate the inner pot left and right to keep the inner pot in good contact with the heating plate. 4. Close the lid. Check whether the sealing ring has been placed on the inner steel ring of the lid, rotate the sealing ring left and right with your hand to make it freely and evenly placed on the steel ring, hold the handle of the lid, lay it flat to the limit edge, and then rotate the lid counterclockwise to the buckle position, and hear"Click"Snapping sound.

5. Place the pressure limiting air release valve, dial it to the sealing position, and check whether the float falls (the float falls before the heating work) 6. Turn on the power supply and the heating lamp is on. (If you do not set the holding time, the heating lamp will be extinguished for a while, and the insulation lamp will be on and it will be in the insulation state). 7. Set the holding time according to the food.

Turn the knob clockwise to.