-
If there is still a problem after the replacement, it is a problem with the model, or there is a hidden light!
-
If you can't replace it with a matte one, change the light to a spotlight, and if it's not top, you should consider it.
-
Spraying a layer of matte varnish should be a good option.
-
Changing the ceiling panel is the best option.
Generally speaking, the space is directly lowered, and then all blocked, and the bottom is still a flat ceiling, and you can't see the horizontal pipe at all, but I don't know what your specific position is, how big. If it is a strong pipe, many people now directly seal it into a pillar and then put it on the brick, and finally leave a square inspection opening.
The waterproofing of the bathroom is not done.
After the waterproofing of the bathroom is done, its waterproof effect is like a shallow plate, and the water on the floor of the bathroom is discharged from the floor drain to the outside in this shallow plate. Now, your shallow plate is somewhere missing, and the water is leaking outside. >>>More
Clean the surface of the mirror thoroughly. This is important. After applying the film, scrape the moisture between the film and the mirror from the middle to the sides.
I have a good way to do this, first remove the inner board that is close to it, then glue it with glass, and finally use foam to plug it through the board taken from the inside, and press the edge of the upper board on the side to be OK.
First of all, don't panic, contact the upstairs owner as soon as possible, knock on the door if you don't have a phone number, and in short, contact the upstairs neighbor to come up and check the situation. If the upstairs water valve forgets to close, let him be notified to close it quickly, so as to avoid more serious water leakage and greater losses. >>>More