-
Anonymous users2024-01-23I have a good way to do this, first remove the inner board that is close to it, then glue it with glass, and finally use foam to plug it through the board taken from the inside, and press the edge of the upper board on the side to be OK.
-
Anonymous users2024-01-22How can the edges of an integrated ceiling split? If it is an aluminum gusset, then you can dip the edge with glass glue.
First find the horizontal line of the top surface, pay off, fix the side keel, hang and hang the main keel, and then start to install the bone from a corner, and install the integrated board. Luminaire installation can be followed up at any time!
In the case of sliding or outward windows, a baffle with the same height as the ceiling can be blocked along the outside of the window. If it is an inward window, the ceiling height must be increased!
Use waterproof sealant directly to tie tightly around it, and it is best not to use white on the ground.
The role of the decoration ceiling is as follows:
1. Prevent water vapor infiltration and oil smoke from scattering, so as to make it clean. such as suspended ceilings in bathrooms and kitchens. >>>More
Generally speaking, the space is directly lowered, and then all blocked, and the bottom is still a flat ceiling, and you can't see the horizontal pipe at all, but I don't know what your specific position is, how big. If it is a strong pipe, many people now directly seal it into a pillar and then put it on the brick, and finally leave a square inspection opening.