The dead corners of the bathroom are difficult to take care of, and the effect is low

Updated on Bathroom 2024-08-08
9 answers
  1. Anonymous users2024-01-24

    Dead spots in the sink. Of the many places in the restroom, the sink is the most frequently used and the most polluting. You can use some soda or salt, or even you can apply detergent directly to the dirt, and when the dirt is dissolved, you can wash it with a rag and water so that your sink will shine like new.

    Dead spots of the faucet. After using the faucet for a long time, it will rust and cover it with an adhesive layer, at which point you can consume lemon to clean the faucet Washing the faucet with lemon not only removes dirt, but also makes it less likely to scratch the faucet. Clean heavily contaminated areas on the faucet with toothpaste, and you're sure to reap satisfactory results.

    Blind spots in mirrors. Wipe the mirror with a rag, wash it again with a sprayer, and finally let it dry. Serious dirt can also be removed with alcohol.

    Dead spots in the bathtub. Use some detergent, wipe gently and wait until the dirt is dissolved before washing with water. Mold residue on bathroom walls and ceilings can often be wiped with brandy.

    If it doesn't work, you can also clean it with alcohol, and the result will be perfect. Brick joints hollow corners. It can be effectively cleaned with some detergent with a bleaching effect, especially those that are already moldy, and you can use a toothbrush to clean it after about 30 minutes of using the detergent.

    Glass hollow corners. There is a high chance that the glass will have a watermark due to prolonged contact with water We can pour the glass cleaner into the sprayer, then spray it evenly on the glass, then wipe it in one direction with a dry cleaning cloth, wait until the glass is dry for 7 minutes, and then wash it with a dry cloth.

  2. Anonymous users2024-01-23

    The dead corners of the bathroom are difficult to take care of, and the effect is low, so leave those dead corners out when decorating, so as to facilitate the usual quick cleaning.

  3. Anonymous users2024-01-22

    The dead corners of the bathroom are difficult to take care of, and the effect is low, in fact, you can choose one, and the mop on the straight side is used to clean, which is conducive to cleaning the corners

  4. Anonymous users2024-01-21

    Usually you must pay attention to the cleaning of the dead corners of the bathroom, try not to throw garbage into the dead corners of the bathroom, if there is garbage, you must clean it up in time.

  5. Anonymous users2024-01-20

    There are a lot of bacteria in the sanitary dead corners, and it is difficult to clean, you can put more cleaning agents in these places, such as soda and laundry detergent, and then use special tools to clean.

  6. Anonymous users2024-01-19

    Spray guns can be used. In addition, for cleaning the mirror surface of the bathroom or the dead corner of the basin on the countertop, we can also use a more convenient bathroom faucet.

  7. Anonymous users2024-01-18

    The main ingredient of cola is carbonic acid, and the main ingredient of toilet dirt is calcification, which dissolves calcium, so washing the toilet with cola can easily remove stains.

  8. Anonymous users2024-01-17

    Hand washstands are the most used and the most dirty, so you can start with a sprinkle of baking soda or salt, or you can apply the cleaner directly to the dirt.

  9. Anonymous users2024-01-16

    You can use some sparkling water or salt, or you can even apply detergent directly to the dirt, and when the dirt is dissolved, you can wash it with a rag and water, and your sink will be as sparkling as new.

Related questions
1 answers2024-08-08

Generally, it is easy to take care of, and you can rinse it with shower water after bathing. The glass shower room with self-cleaning function makes it more convenient to flush and clean the shower water.

1 answers2024-08-08

Bathroom cleaner, toilet brush, floor brush, 3 towels (one wash basin, mirror, one to wipe water stains from the mirror and glass, one to scrub the outside of the toilet). There is a bathtub and a bathtub brush. >>>More

4 answers2024-08-08

Trick 1: Tile seepage and mildew prevention.

The walls of the bathroom are mostly tiled, and a multi-purpose stain remover can be used to keep them clean and shiny. As for the gaps in the tiles, you can first use a toothbrush dipped in a little detergent to remove the scale, and then brush a waterproof agent with a brush in the gaps. This not only prevents seepage, but also prevents mold growth. >>>More

1 answers2024-08-08

The first trick: a clever way to wipe the glass.

Mirrors and windows will leave watermarks and become blurry due to long-term contact with water, spray a large X-shape on the glass with a spray glass cleaner, then fold the wrung out rag, wipe it in one direction along the person, and wait until the skin glass is dry, and then wipe it with a dry cloth. It can also be wiped with old newspapers, and the ink of the paper not only makes the glass shiny as before, but also wipes away stubborn dirt. The other can also wipe the angle valve. >>>More

1 answers2024-08-08

Features of PPR pipes:

1. Thermal insulation and energy saving (the thermal conductivity is only 1 per 200% of the metal pipe), and there is no need to do thermal insulation treatment under normal circumstances; >>>More