Hot cups and trays placed directly on the lacquered surface of furniture will leave burn marks, is t

If it's a solid wood table with varnish, we just need to apply a little bit of ordinary iodine to the table and wipe it vigorously with a rag. After two days, the traces will naturally disappear. If it is fire paint, then we need to put a little alcohol or shochu in the place where the hot cup has been placed, and then burn it with fire, and the burning marks will be removed immediately.

In addition to this, we can use kerosene, alcohol, bath water for scrubbing. You can also use a soft cloth to pad the underside of the teacup. Finally, we apply some petroleum jelly oil to the stained area, and wipe it off with a rag after a day or two, and it is possible to remove the hot stamp.

Of course, this is a way to make up for the dead, once there is really a hot stamp, no matter how scientific and superb my remedy is, the solid wood furniture after the remedy will definitely be inferior to the original.

So what I want to say is that we should not only know the solution after the hot stamping, but also pay more attention to the maintenance method of solid wood furniture. Use a glass guard. Placing a 2 cm glass table on top of the table can not only effectively protect against the impact of heavy objects, but also deal with some problems such as hot tea cup hot stamping.

Keep temperature and humidity stable. Compared with hardwood furniture, solid wood furniture has a lower density, and the performance of thermal expansion and contraction will be more obvious.

When the humidity of the air is too low, it shrinks, and when it is too high, it expands. In addition, solid wood furniture is mostly maintained in the previous texture rather than decorated with paint. Therefore, the solid wood table must be carefully used in the position, never placed in too humid or too dry places.

Care should be taken when moving. Clean up more often and beware of insect borer breeding. Solid wood tables are popular with moths, so it needs to be rubbed a lot.

Keep as much dry as possible and place the right amount of solid preservatives to prevent pest infestation.

It can be scrubbed with kerosene and alcohol-based water. You can also use a soft cloth to pad the underside of the teacup. Apply some petroleum jelly oil to the stained area.

Hot cups and plates are placed directly on the lacquered surface of the furniture, leaving a circle of burn marks. Generally, it is enough to wipe it with a cloth dipped in kerosene, alcohol, toilet water or strong tea, or gently rub or apply a layer of petroleum jelly oil on the scald with iodine wine; Wipe the burn marks with a rag every two days to get rid of them.

I don't know much about this, but I usually put some paper or rags on top of the furniture to prevent burns on the furniture.

Generally, it is enough to wipe it with a cloth dipped in kerosene, alcohol, toilet water or strong tea, or gently rub or apply a layer of petroleum jelly oil on the scald with iodine wine; Wipe the burn marks with a rag every two days to get rid of them.

If it is fire paint, then we need to put a little alcohol or shochu in the place where the hot cup has been placed, and then burn it with fire, and the burning marks will be removed immediately.

Burnt marks on the lacquered surface of wooden furniture. Unextinguished fireworks, ashes, or matches can sometimes leave scorch marks on the painted surface of furniture. If it's just baking paint, you can wrap a hard cloth around the toothpick, gently wipe it on the mark, and then apply a layer of wax to remove the burnt mark.

Since furniture can become dull over a long period of time, painting can slow down the change in the color of the furniture, while also serving as a protective and beautifying effect. But there's nothing to worry about after you draw. Painted surfaces also need to be maintained.

Here are some tips for maintaining the lacquer surface of furniture to keep it smooth and bright for a long time, with harmonious colors and protect our furniture.

1. Avoid contact with high-temperature materials and high-concentration chemicals and high-temperature materials, it is best not to contact directly with the paint, but also to stay away from heat sources such as radiators and furnaces, otherwise the surface will dry up and crack and the paint film will fall off. At the same time, try to avoid contact with highly concentrated chemicals, such as hydrochloric acid, diluents, etc.

Furniture paint surface maintenance2. Avoid direct sunlight and do not expose it to direct sunlight, as long-term UV exposure can cause cracking and chalking of paint surfaces. Therefore, it is best to place painted furniture in a place that is not exposed to sunlight and avoid prolonged exposure.

If there is really no place to put it, you should install curtains to block ultraviolet rays.

Furniture paint surface care 3. Be careful not to collide and cut with hard objects

When moving furniture, take care to prevent scratches and bumps. If there are children in the house, Be more careful. Do not let your child carve with hard objects, as this can easily damage the paint film.

This damage is difficult to repair and easily expands and peels.

Hot cups and plates are placed directly on the lacquered surface of furniture, which will leave burn marks, and try to avoid this situation in life, otherwise it is easy to damage the furniture.