-
Anonymous users2024-01-24(1) After all solid wood floors are transported to the construction and installation site, they should be unpacked and stored indoors for more than a week, so that the solid wood floors can be used only after they are suitable for the temperature and humidity of the room.
2) Before the installation of solid wood flooring, the selection should be carried out to eliminate the unqualified products with obvious quality defects. The color pattern is consistent in the same room, there is a slight quality deficiency but does not affect the use, can be placed in the bed, cabinet and other furniture at the bottom of the use, the same room must be the same plate thickness. When purchasing, it should be purchased at one time according to the loss of the actual pavement area increased by 10%.
3) Paving solid wood flooring should avoid construction under heavy rain, rainy and other climatic conditions. It is best to keep the indoor temperature and humidity stable in the interior decoration of the floor.
4) The installation of solid wood flooring in the same room should be paved at one time, so sufficient auxiliary materials should be prepared, and the finished product should be protected in time to prevent oil collapse, juice and other pollution surfaces. The glue extruded during installation should be wiped off in time.
5) Generally speaking, the direction of laying the floor should be parallel to the direction of most of the light outside the window, or parallel to the longer wall of the room to obtain a better visual effect. Before laying or encountering irregular room types, the installer should explain the effect of various laying directions to the user, and should solicit the user's opinions, and indicate it on the installation work sheet.
6) Solid wood floor installation can also choose the appropriate nail nailing method! When the floor is installed, a layer of plastic foam is laid underneath, and the floor is directly laid on top! There will be no thumping sound when such a floor is gone!
Installation steps for solid wood flooring:
1) Make the ground flat, clean and dry, and apply waterproof paint twice; >>>More
As a high-grade flooring material, solid wood flooring is very popular in home decoration. It has many installation methods, and several of them are described below. >>>More
Dear, the light steel keel is used for ceilings and partition walls. >>>More
There is no clear standard for the installation of solid wood floor keel, but at present, the decoration process is more used or 3*4, with a length of 2-4 meters. Standard number of solid wood floor keel: laying keel is a meticulous work, first of all, according to the direction and length of the floor laying, draw out the position of the keel laying, to ensure that the distance between each keel does not exceed 30 mm, and the two ends of each floor are framed on the keel. >>>More
How much is the keel spacing of solid wood flooring generally depends on the degree of impact resistance of the selected floor, the air-dry density of the floor, the impact resistance of the floor is good, the floor strength is high, and the keel spacing is not more than 45 cm, such as iron camphor, picking subwood, fragrant two-winged beans, disc beans, iron wires, etc. When the air-dry density of the floor is less than or equal to, the strength of the floor is average, and the spacing of the keel should not exceed 35 cm, such as birch, longan, new dun bean, etc.