-
That's to prevent cracks on the wall after it dries!
-
In order to solve this problem, a layer of asbestos cloth is laid at the interface of the gypsum board to effectively solve the phenomenon of cracking of the gypsum board interface.
Ask for help Gypsum board ceiling surface needs to be scraped all putty or only at the joints >>>More
Not necessarily, because the two are not closely related. Scraping putty is generally quoted together with brushing the wall.
You think too much, now the worker's labor fee is 50 per square meter, and you said that there are still materials for you to scrape putty.
Wooden keel gypsum board hanging shed modeling 150 per square meter, artificial materials. Scrape the large leucorrhoea material of one square meter. >>>More
If a slight settlement causes a crack, the clay inside the crack can be pulled out. If the gap is too small and almost closed, the gap should be cut to about 4 mm, and then smoothed with caulking clay, pasted with grid or paper tape along the gap, scraped white, sandpaper, and painted latex paint. >>>More