-
Anonymous users2024-01-24The installation methods of aluminum gusset and aluminum-plastic panel ceiling are not the same, and the difference is very large. The skeleton of the aluminum gusset plate is a light steel keel + triangular keel. The aluminum-plastic panel skeleton is a wood base.
The aluminum gusset plate is expanded on the ceiling with a boom, the screws on the boom are fixed on the main keel, and then the triangular keel is threaded with a connector, and the plate is directly buckled on the triangular keel, and the workmanship material is relatively thin; Aluminum veneer, also known as special-shaped aluminum veneer, is installed on the wall and fixed on the wall with angle iron, and the upper screw is fixed on the wall or ceiling.
Vertical transportation equipment such as elevators for aluminum plates and accessories are transported to each construction site. Use detergent to clean the side of the aluminum plate against the interior surface and the surface of the column frame. The whole aluminum plate is connected with the keel through the surrounding aluminum corner code (hanging ear) and fixed on the keel.
Fixing method, if it is a seamless splicing inside, it can be turned with an electric drill at the corresponding position on the keel, and then riveted with a flat head (countersunk head) aluminum rivet; If it is a plate with glue seams on the outside, you can use steel tail screws (also known as flange screws or phoenix tail nails, see figure) to drill directly into the keel through the connecting holes of the aluminum corner code to fix the aluminum plate, but pay attention to control the tightness of the drill bit to adjust the aluminum plate. The aluminum plate enters the site for trial assembly, first fix the aluminum plate slightly on the keel, pay attention to the installation accuracy control, and then tighten the plate after adjusting it. When installing the aluminum plate, it should be installed on the wall according to the number of the aluminum plate.
-
Anonymous users2024-01-23The practice is basically the same, the frame of the aluminum gusset is metal.
-
Anonymous users2024-01-22The aluminum gusset is pre-formed, and there are matching accessories such as keel and boom. It is easier to install.
The aluminum-plastic panel is used as the ceiling material, which needs to be processed and formed on site, and the arbitrariness is relatively strong.
So there is a difference in the specific approach.
It's very good, and now there are more and more friends who install AIA ceilings, and you'd better go to the field to find out what materials are used.
It is not that the thicker the better, the aluminum gusset ceiling does not need to be too thick, and it can meet the standard. It's not good if it's too thick, because it's upside down, and it's easy to fall off if it's heavy.
You can compare these aspects, and then choose based on your actual situation. >>>More
If you must use an aluminum gusset ceiling, you can choose a pilot pattern, and the color is best not too heavy.
Aluminum gusset ceilings also need keels, but not light steel keels used when hanging gypsum boards, they are keels, but not a model, specification and type.