What should I do if the floor heating bathroom radiator is not hot

Updated on Bathroom 2024-08-13
3 answers
  1. Anonymous users2024-01-24

    Floor heating is low-temperature radiant heating, the radiator must be relatively cool, put the exhaust valve down.

  2. Anonymous users2024-01-23

    There is air in the radiator, just drain the air inside

  3. Anonymous users2024-01-22

    Hello, about your question, I think floor heating is a very popular way of heating in the family now, its main feature is that the heating is clean, farewell to the pollution caused by the previous charcoal heating, the heat of the floor heating is from the soles of the feet up, so that the heating is more comfortable. The floor heating in the home is generally heated from the living room, so the bathroom will heat more slowly. If you say that the bathroom is not hot after burning for a long time, then you have to discuss with the property to ask them to increase the heat pressure of the floor heating, or clean the pipes under the floor heating, there will be scale in it for a long time, which will also affect the temperature of the floor heating.

Related questions
7 answers2024-08-13

The installation of radiators at home can be selected after the decoration is completed, and at the same time as the installation of water and electricity lines. The location of the radiator installation varies according to the room with different functions, and when determining the location of the radiator, it is necessary to consider both the problem of convection and the problem of heating cold air. >>>More

1 answers2024-08-13

If the heating pipe in the bathroom is a separate circuit, turn off the inlet pipe of the heating in the bathroom and replace the radiator. >>>More

2 answers2024-08-13

Floor heating problem, Sichuan Hetu HVAC Company feels that air exhaust is not very effective.

6 answers2024-08-13

1. The valve is not opened.

If you encounter a radiator situation at home, you should first check whether the radiator valve is open. The radiator valve is generally a spherical valve, the valve has generally been adjusted before leaving the factory, generally only two directions, the handle is open when it follows the pipe, and the rotation is 90 degrees to close. >>>More

10 answers2024-08-13

It depends on whether the whole is installed with floor heating or radiators, if the whole is floor heating, or should be installed with floor heating, the water distributor should go to the bathroom, so that once the water leakage can be solved within the scope of the bathroom. If the whole is a radiator, there is no point in heating the bathroom according to the floor heating, because the water flow will only go along the heating pipe, and the floor heating pipe is thin and curved, which will affect the flow rate, and it is generally not hot. >>>More