Underfloor heating, the living room is hot, and the bedroom is cold

Updated on Living room 2024-08-13
2 answers
  1. Anonymous users2024-01-24

    It can be controlled by adjusting the flow control valve on the manifold, with the flow rate in the living room being smaller and the bedroom being larger.

  2. Anonymous users2024-01-23

    The water separator has two rows of small valves, which can be opened by pressing one by one.

Related questions
2 answers2024-08-13

Check the water separator switch, if you can't do it, you have to cut a part of the ground.

3 answers2024-08-13

1. What is the water supply temperature and flow rate?

2. When there is a pipeline blockage during inspection: close the circuit with higher temperature, and open the valve of the circuit with lower temperature to the maximum. See if the temperature can be raised. >>>More

4 answers2024-08-13

16 degrees are all qualified... 20 degrees Celsius The temperature in your home is basically normal. If the neighbor's house is also fully open, it may be less high.

2 answers2024-08-13

1. It is likely that the floor heating pipe in the master bedroom is blocked, resulting in poor hot water circulation, and the floor heating needs to be cleaned. Assuming that there is 1mm of scale in the floor heating pipe, it may cause the water temperature of this pipeline to drop by about 5°, and more and more scale will cause the pipe to be clogged for a long time. The treatment method is very simple, that is, ask a professional master to come to the door to clean. >>>More

2 answers2024-08-13

There is a problem with the water collector and the water circulation pressure is not enough.