Floor heating is not hot, is it useful to put water in the bathroom radiator

1. The valve is not opened.

If you encounter a radiator situation at home, you should first check whether the radiator valve is open. The radiator valve is generally a spherical valve, the valve has generally been adjusted before leaving the factory, generally only two directions, the handle is open when it follows the pipe, and the rotation is 90 degrees to close. >>>More

You check that the valves of the water separator and water return are fully open. In the past, it could be hot.

It depends on whether the whole is installed with floor heating or radiators, if the whole is floor heating, or should be installed with floor heating, the water distributor should go to the bathroom, so that once the water leakage can be solved within the scope of the bathroom. If the whole is a radiator, there is no point in heating the bathroom according to the floor heating, because the water flow will only go along the heating pipe, and the floor heating pipe is thin and curved, which will affect the flow rate, and it is generally not hot. >>>More

The method of deflating floor heating from the toilet radiator is: it is necessary to open the air release valve of the water inlet pipe of the water separator and the air release valve of the return pipe to degas the floor heating device. >>>More

Groove in the wall and ground, lie in the pipe with an elbow, and then close it after testing the water.