What are the usual types of tile materials for villa bathroom decoration?

1. Glazed interior wall tiles.

Commonly known as ceramic tiles, it is called glazed tiles because there is a layer of glaze hanging on the surface of fine pottery. The glazed tiles have smooth glazes and colorful patterns, including monochrome, printed, and high-art patterns. Glazed tiles have the characteristics of non-stain absorption, corrosion resistance and easy cleaning, so they are mostly used in kitchens and bathrooms.

The water absorption rate of glazed bricks is high (the state stipulates that its water absorption rate is less than 21%), after the water absorption and expansion of the ceramic body, the surface glaze with small moisture absorption and expansion is in a state of tension pressure, and long-term freezing and thawing, there will be peeling off and peeling phenomenon, so it can not be used outdoors.

2. Color glazed ceramic wall and floor tiles.

Referred to as colored glazed bricks, the surface is applied with beautiful and gorgeous glaze colors and patterns. The state stipulates that the water absorption rate of such products is not more than 10%, because the moisture absorption and expansion of the fine pottery body is small, and the glaze can be well combined, so the high strength can be used for the ground, but also for the wall.

3. Porcelain tiles.

It is also known as homogeneous bricks, full-body bricks, and vitrified bricks. The sintering temperature of bricks is high, and the degree of porcelain is good. The water absorption rate is less than and the wet expansion is minimal.

Therefore, the brick has high flexural strength, wear resistance, acid and alkali resistance, no discoloration and long life. There were no visible defects at minus 15 and 20 freeze-thaw cycles for 20 times.

Which is good for bathroom tiles.

1. Glazed bricks.

This kind of tile is called glazed tile because it is glazed on the fine pottery surface. The glazed surface of glazed tiles is smooth and flat, and the patterns are rich, including monochrome, printed, high-grade art and other patterns. At the same time, glazed tiles have the characteristics of non-stain absorption, corrosion resistance and easy cleaning, so they are often used in kitchens and bathrooms.

Glazed bricks have a high water absorption rate, and the water absorption expansion and deformation are small, but they are in a freeze-thaw state for a long time, and the skin will peel off, so they cannot be used outdoors.

2. Color glazed ceramic wall and floor tiles.

This type of floor tile is also known as colored glazed brick, which has layers of very beautiful and bright glaze colors and patterns on the surface. According to the relevant national regulations, the water absorption rate of this kind of product can not be greater than 10%, and because the ceramic tile body of the ceramic tile body expands and deforms little after moisture absorption, it can be well combined with the glaze, so it is often used for the floor and wall of the bathroom.

3. Porcelain tiles.

Porcelain tiles are also known as full-body bricks and vitrified tiles. This kind of tile has a high temperature when it is made, the degree of porcelain is quite excellent, the water absorption rate is usually below, and the moisture absorption expansion and deformation are small. Therefore, this kind of tile has high bending strength, resistance to abrasion, acid and alkali, is not easy to discoloration, has a long service life, and can be 20 times without visible defects under minus 15 to 20 freeze-thaw cycles.

Bathroom tile purchase skills.

1. Pay attention to the anti-slip properties of ceramic tiles.

Bathrooms should choose tiles with excellent slip resistance, especially those with the elderly and children, matte tiles have a concave and convex feeling like natural rocks, excellent anti-slip performance, suitable for use in humid environments.

2. The matching of the waistline should be whole.

We can often see many people use the waist line to enhance the ornamentality, according to the overall matching effect to choose the horizontal and vertical waist line, the pattern of the waist line and the color of the tile to be harmonized and unified, usually, the waist line and tiles in the bathroom are best to use plain patterns.

3. The matching of floor tiles and wall tiles should be whole.

From the floor tiles and wall tiles to be harmonious and unified, the paving method of the tiles can be changed, or local changes with other materials, so that the whole space seems full of overall sense and full of changes.