-
You can use the smart switch panel from Cibes. This way, you can control appliances in any part of your home in another according to your settings. The main thing is that there is no need for wiring. In this way, you will save yourself such troubles. It can also be controlled remotely by mobile phone.
-
One wire from your original switch to the new switch is enough.
It is recommended to check the line first, and there is a possibility that if it is dual control, of course, both sides can be controlled.
The wires are too thin and not done according to national regulations. The minimum wires of the state regulations are strictly forbidden to be used. >>>More
There must be a problem, the lamp will be tested before installation, the lamp is no problem must be the problem of the line, you directly find the decoration company, do not help you change it you will not accept. >>>More
This problem is generally that the wire is reversed, that is, after you disconnect the switch, the live wire is still connected, but the neutral wire is disconnected. There are many LED lamps and lanterns that have this problem. Depending on where you bought it, this problem will not occur with good quality.
It's better not to do that! It was originally a solid wood floor and then a drain pipe underneath, which was not suitable. The impact is that there is a fear that the water pipes will seep in, causing the floor above to be flooded!