-
According to your description, there should be no water in the water pipe at all or the solenoid valve is broken.
First of all, you can open the button cover, check if the float is stuck inside, and if so, reset it. Check whether the hose connecting the water tank is blocked, you need to close the valve in advance and then flush the remaining water in the tank before checking, if it is, you can call the master to replace it. You can check if there is an element in the tank that looks like a water cup is stuck, and if so, reset it. >>>More
What the hell is Royalstar, Geberit guides the installation price of 500
Let's go and see if the grey water meter is used up.
Lift the toilet lid and see if the button inside is pressed underneath, you can press it with your hand. >>>More
1. Press the one that comes out of the water and connect the lid in the toilet tank to see if this is broken, if it is fine. >>>More
There is no water on the top of the smart toilet, and only a telescopic rod will come out of the water for flushing. If this rinse stick doesn't come out of the water, the controller is broken and there is less chance of clogging. FYI.