-
Anonymous users2024-01-24Let's go and see if the grey water meter is used up.
Lift the toilet lid and see if the button inside is pressed underneath, you can press it with your hand.
The toilet is broken and needs to be repaired by a master.
First of all, you can open the button cover, check if the float is stuck inside, and if so, reset it. Check whether the hose connecting the water tank is blocked, you need to close the valve in advance and then flush the remaining water in the tank before checking, if it is, you can call the master to replace it. You can check if there is an element in the tank that looks like a water cup is stuck, and if so, reset it. >>>More
There is no water on the top of the smart toilet, and only a telescopic rod will come out of the water for flushing. If this rinse stick doesn't come out of the water, the controller is broken and there is less chance of clogging. FYI.
Pick up which lid to see if there is water in it, if there is water, it may be which button you pressed is stuck, and poke it twice. Just let it move.
The main problem is at the bend at both ends of the water pipe, which can be focused on dredging. The straight part of the pipe is not too much of a problem.
Either the water is stopped, or the sanitary ware inside the tank is damaged, and the angle valve outside the tank (which supplies water to the tank) is not open (closed) or damaged, and the water cannot be supplied.