What should I do if the toilet doesn t come out of the water no matter how I press it

Updated on Toilet 2024-05-26
2 answers
  1. Anonymous users2024-01-24

    Pick up which lid to see if there is water in it, if there is water, it may be which button you pressed is stuck, and poke it twice. Just let it move.

  2. Anonymous users2024-01-23

    Check the main valve for tap water first, and then open the lid of the water tank to check the upper and lower water, it is possible that the drain of the toilet has blocked the foreign object. See if the piston can be plugged, if you can't plug the water tank, it will leak, and if the water tank is not satisfied, the switch will not reach the water. It is also possible that the plug of the plugging tank is broken, or the connection with the button is loose, which will lead to the phenomenon of no water.

Related questions
What should I do if there is no water on the top of the smart toilet
1 answers2024-05-26

There is no water on the top of the smart toilet, and only a telescopic rod will come out of the water for flushing. If this rinse stick doesn't come out of the water, the controller is broken and there is less chance of clogging. FYI.

The toilet doesn't press the water
2 answers2024-05-26

There may be three conditions that cause no water:

1. The water level of the water tank is high enough, and the flushing is not smooth, which is caused by air pressure. Check that the 2 side screw holes at the bottom of the toilet bowl are sealed. There must be some seams. >>>More

The toilet can't press out of the water
8 answers2024-05-26

First, the toilet button is empty.

1.The toilet button is broken, and when you press it, it will be empty. It is necessary to replace the toilet button. Before replacing the button, drain the water in the toilet tank, close the toilet bowl's water valve, and remove the water tank cover. >>>More

Toilet outlet valve dismantling illustration of what happens when the toilet bowl does not come out
3 answers2024-05-26

There are several kinds of <> drain valves, and the picture is for reference. If there is water in the water tank and cannot be pressed, it is a drain valve problem; If the water inlet is normal, the water tank cannot hold water, which is also a drain valve problem; If you can't get water, it may be a problem with the water inlet valve. FYI. (Image quoted from image).

What to do if the balcony faucet does not come out of the water
2 answers2024-05-26

The main problem is at the bend at both ends of the water pipe, which can be focused on dredging. The straight part of the pipe is not too much of a problem.