If the waterproofing under the bathroom sill stone is not done, will it affect the moldy wallpaper o

Updated on Bathroom 2024-08-20
1 answers
  1. Anonymous users2024-01-24

    The impact is not big, what you said should be the door stone, and the door stone should be waterproof. [This waterproofing is not done together with the bathroom waterproofing, (you may not be able to do this position when doing the bathroom waterproofing) but when the bricklayer installs the door stone, the waterproofing is done underneath]. If it is not waterproof, try not to let the water flow to the bathroom door when taking a bath.

    You can use things like the bath screen to block water, and at the same time keep the floor drain unobstructed, so that the water does not flow to the bathroom door when taking a bath, and clean the bathroom floor in time after taking a bath, and do not store water.

Related questions
Why does the door sill stone of the bathroom have a waterproof field?
1 answers2024-08-20

Dig the best permeable waterproofing can be done by yourself. >>>More

Which is better, the waterproof under the bathroom threshold, the gambling leak king or the waterpro
3 answers2024-08-20

The two are best used in combination. First fill the gap under the plugging threshold with the plugging king, and then apply waterproof paint on the plugging king, and then make a protective layer. This makes it waterproof and durable.

Does the bathroom wall waterproof and high affect the tiling?
12 answers2024-08-20

There is no impact. Remember to be sure to post it.

Tile. Before doing waterproofing, room. >>>More

Does the bathroom waterproofing too high really affect the quality of the wall tiles?
4 answers2024-08-20

In fact, no, the first choice depends on your waterproof material selection is very important, waterproof construction if there is a hollow drum will also have an impact, the thickness of the brick mortar can not exceed the original base surface can not run anything. It's all related.

If there is no waterproof coating under the bathroom floor tiles, is there any remedy?
4 answers2024-08-20

THIS IS A VERY SERIOUS MISTAKE, THE BATHROOM WATERPROOF IS A VERY IMPORTANT PROCESS, THE WATERPROOF LAYER SHOULD EXTEND FROM THE GROUND TO THE WALL, 250MM HIGHER THAN THE GROUND BATHROOM BY THE SHOWER HEAD WALL WATERPROOF LAYER HEIGHT SHALL NOT BE LESS THAN 1800MM; After the waterproofing project is over, you have to do a 24-hour water storage experiment, if you do not do waterproofing, it is likely to leak in the future, it is best to open the floor tile to do waterproofing again, otherwise any other method of surface treatment in the floor tile is not safe, it is likely to be futile, once there is a problem, it will affect others, the consequences will be more serious. Therefore, if you want to solve the problem completely, it is best to open the ground rotation and redo the waterproofing.