What are the tips for unclogging kitchen sewer pipes

1. Buy a pipe dredge of about 2 meters on the stall, bend it at 2 cm of the head, put water on one side, extend the dredge into the water outlet, and stick it into it while shaking; Then put the dredge into the water inlet, dredge while draining the water, and repeat it a few times, and it is best to dredge it every other week in the future.

2. Spring drill bit is a more traditional method with a certain technical content, after all, modern tools are used. The principle is similar to that of the previous drill bit for filling, but there are certain limitations, that is, there are more places to bend the pipe, and it is not easy to use.

3. Find a wire with a diameter of millimeters, 3-4 meters long, fold it in half from the middle, and then twist it into a strand, and then bend the two ends in different directions on the side of the single end, and then stretch this end into the sewer pipe, grab the other end, and twist it in one direction while going inside. If you can't twist it and you can't get it in, you can pull it out. Some sundries can be hooked out, repeated several times can basically dredge, if your wire hook can not be something, is unblocked, then the problem may not be your home, there may be downstairs pipe blockage.

4. The sewer is full of water, press down with a leather plug, and then lift it violently, so that a certain pressure and pumping force will be formed, and the blocked debris may be washed away. But if it's stuffed too hard, I'm afraid only a serpentine tube will do.

5. Put in a small yellow beetle, or add some irritating things such as washing powder or salt, and then cover the lid, and the sewer pipe will be opened in an instant.

6. Green method to unclog the sewer: pour 1 cup of laundry detergent into the clogged sewer, then pour 3 cups of hot water. If that doesn't clear the drain, pour 1 more cup of vinegar into it.

7. Log dredging sewer method: we can find a log stick that is about the same thickness as the sewer pipe, insert it into the pipe, and then put a certain amount of water in the pool, and quickly pump the log up and down without interruption, under the action of suction and pressure, the clogged dirt in the pipe will be washed away.

8. High-pressure sewer dredging: a pneumatic cylinder like an oxygen cylinder (but much smaller), connected to a 40cm metal nozzle. First, fill the blocked pipe with water to about 10cm away from the pipe mouth, put the metal nozzle into the pipe, and wrap the pipe mouth with a wet towel to seal it.

Turn on the air pressure switch, hear a crisp sound of launching water, and the project is over.

As the saying goes, it's better to rely on yourself than to rely on heaven and earth. Not only is it expensive for us to go and hire someone to unclog the sewers, but it doesn't solve the problem right away. Once we learned how to unclog the kitchen drain, we no longer have to worry about the kitchen drain being clogged.

1. Boiling water dredging method. Generally, the sewer pipes at home are clogged with greasy, so it will be better to pour a pot of boiling water into the sewer pipe first, and then dredge it. You can also pour some sulfuric acid into it, and the greasy, hair and other blockages can melt.

2. Pump dredging method. If the kitchen drain is clogged, you can plug the hose of the pump into the drain, add a small amount of water, and continuously pump air into the pipe.

3. Use water pressure dredging method. Take a plastic pipe with a diameter of 1 cm and a length of about 100 cm, put one end tightly on the faucet, and insert the other end into the blockage of the pool, wrap it around the rubber pipe with a cloth, plug the drain of the pool tightly, open the faucet and twist it to the maximum, the pressure of the water is enough to flush the blockage away.

4. Soda and vinegar dredging method. Pour half a cup of cooked baking soda down the drain and then half a cup of vinegar, which reacts with the acid in the vinegar to remove the sticky stuff from the pipes.

5. Log dredging method. First, insert a log with a diameter close to the drain into the water pipe, put a certain amount of water in the pool, and quickly pump the log up and down without interruption, and the dirt in the pipe will be washed away under the action of suction and pressure.