What material is good for a lightweight partition wall in the bathroom

First, the choice of substrate.

The area of the bathroom is usually not large, and it is really difficult to separate the dry and wet in an area of a few square meters, so we have to hope for the basic materials with moisture-proof engineering. Therefore, it is recommended that the bathroom cabinet selected should have better moisture-proof performance in terms of material and technology. If a good quality product is fully ventilated, there is no problem if the humidity reaches 95% in a short period of time, because it will dry out in a short time.

Second, panel selection.

The first barrier between bathroom furniture and the humid air in the room is the furniture panel, so the advantages and disadvantages of the panel are also a problem that we need to consider. In the face of a dazzling array of panels on the market, owners must not have any choice when purchasing, and they must choose the panel that suits them. High-quality solid wood veneer and wood grain with plastic resin protection are easier to maintain and have a classic aesthetic in terms of decorative effect.

3. Internal moisture-proof.

A common phenomenon in the bathroom is that the low floor of the sink cabinet will be deformed after the bathroom furniture has been used for a period of time, because the water pipes hidden in the cabinet are not taken seriously. Because the pipe was relatively hidden, it was installed without consideration for stability, so the low waterside of the cabinet remained and soaked the furniture, creating an irretrievable situation over time. Therefore, it is necessary to use a waterproof aluminum bottom plate with a waterproof bumper strip, and this will not be the case.

Fourth, pay attention to the installation process.

Be sure to pay attention to the sanitary ware in the bathroom. While choosing bathroom furniture is important, it is only the first step, and the installation process is equally important, and if you don't do it well, it will be useless. You must know that water droplets and water vapor are pervasive, and it is best to do a good job of waterproof and moisture-proof, and you must do a good job in the installation of bathroom furniture.

Sanitary partition material.

1. Moisture-proof board.

Moisture-proof board is to add a certain proportion of moisture-proof particles in the production process of the substrate, also known as melamine board, with multi-layer special fiber materials, soaked with an appropriate amount of phenolic resin, and made by high temperature and high pressure, suitable for humid environment, the degree of expansion of the section of the moisture-proof board in case of water is greatly reduced. It is made of wood fiber and special moisture-proof agent, and the surface decoration melamine is molded at one time by high temperature and high pressure. All mechanical properties, physical properties and surface properties meet the requirements of the German industrial standard DIN, and the quality is excellent, which is the best choice for bathroom partition materials.

The second material of sanitary partition, PVC board.

PVC board is a board made of PVC as raw material with a honeycomb mesh structure and a cross-section. It is a kind of vacuum blister film, which is used for the surface packaging of various panels, so it is also known as decorative film and adhesive film, which is used in many industries such as building materials, packaging, and medicine.

Features of PCV board products:

1. Waterproof, flame retardant, acid and alkali resistance, mothproof, light weight, heat preservation, sound insulation, shock absorption;

2. It is processed the same as wood, and the processing performance is far better than that of wood;

3. It is an ideal substitute for wood, aluminum and composite panels.

The third material of sanitary partition is tempered glass.

Tempered glass belongs to safety glass. Tempered glass is actually a kind of prestressed glass, in order to improve the strength of the glass, chemical or physical methods are usually used to form compressive stress on the surface of the glass, and the glass first counteracts the surface stress when it bears external force, thereby improving the bearing capacity and enhancing the wind pressure resistance, cold and heat resistance, impact and so on. Flat tempered and curved tempered glass belong to safety glass.

It is widely used in high-rise building doors and windows, glass curtain walls, indoor partition glass, lighting ceilings, sightseeing elevator passages, furniture, glass guardrails, etc.

Hope it helps