I have made invisible waterproof liquid on the floor tile of my bathroom, and I want to remove it, w

Yes, it will raise the floor, and you have to consider the difference in the height of the floor in the final hall. Generally, hairing, and then interface agent, you can apply tiles.

The bathroom generally needs to be impermeable before laying floor tiles, so there is no need to apply waterproof and anticorrosive glue.

First of all, you need to determine what is the cause of the leakage of the floor in your bathroom, 1. Find a professional plumber to check whether the pipe is ruptured and the water leakage is caused by the leakage, if it is a pipe problem, you need to repair the pipe in time to solve the leakage problem; >>>More

First of all, you have to determine whether there is a leak there, a leak under the floor tiles or a leak on the top. >>>More

Do it all over again!

First use waterproofing agent mixed with cement mortar to do the base layer of the bathroom again, so as to avoid leakage caused by waterproof coating due to uneven thickness and wait for drying, and then use waterproofing agent mixed with cement ash on the surface of the first brush layer, so that the main purpose is to plug the small holes produced after the first drying. The joints between the walls and floors of the bathroom and the joints between the water and water pipes and the floor are the most problematic areas. During construction, the joints should be painted in place. >>>More