-
If there is a keel in the installation position, it is possible; If there is no keel, ask the carpenter to cut the gypsum board at the installation position, put a woodworking board on the top surface, and then fix the bead curtain on the woodworking board. The width of the cut gap is based on the ability to put the woodworking board on the top surface, and the gap is covered with the guide rail of the bead curtain.
It is advisable to discuss it with the carpenter, they should have a way.
-
No, you can.
I've bought it, as long as the nail can be stare into, you can install it, the steel nail can be ah, the guide rail link.
-
Before the carpenter ceiling, let him nail the keel or board where the beaded curtain is to be hung.
-
It is recommended that you design it to be installed on the original roof of the house, which is a bit overhanging on the suspended ceiling.
Whether the gypsum board ceiling can be installed on the roller lamp plate, the following issues should be considered: >>>More
Can be repaired. Is there a hole? Yes, do the base layer, then seal a piece of gypsum board, and then paste kraft paper, you can
Cracks in suspended ceilings, which should be a common problem. It is difficult to eliminate and it is impossible to guarantee that there are 100% cracks, which has nothing to do with longevity. It is a quality problem. There are no special cases and will not cause deformation.
As long as the gypsum board is not damp, there will be no problems, as for maintenance, just don't let it get wet! It can be more than ten years.
Of course you can, no problem, the gypsum board is ready to be shaped, and it is easy to cut.