-
Anonymous users2024-01-24There are different installation methods for various types, taking the more common wall-mounted and floor-mounted types as examples
General similarities: the design and installation location as far as possible near the door for ease of use, reserve the water outlet in the center of the wall at about 50, the mirror lamp reserved line m center on the wall, first install the lens and sideboard, and then install the main cabinet or bracket, and then put on the countertop that has installed the faucet drainage, test the water after connecting the pipe, and play anti-mildew glue in the gap between the wall after the basin, and the height of the washbasin mouth is about 80, and pay attention not to hurt the hidden pipeline during installation.
Differences: The wall-mounted type requires the wall to be a solid (clay brick is preferred) wall, the floor cabinet does not need to have waterproof isolation adjustment feet, if there is a special-shaped size, it is recommended to use a stone countertop that can be cut, and the conventional ceramic basin is more durable and cost-effective.
If there is a special situation, try to answer it.
1) Install washbasin: Install the washbasin with a pipe frame, draw a vertical line according to the median of the sewer nozzle, measure the specified height from the ground upward, draw a horizontal line on the wall, draw a mark on the wall according to the width of the basin, and make a hole with a diameter of 120 mm deep. Wash away the bricks and slag and other sundries in the hole, insert the expansion bolt into the hole, twist it with cement, hang the fine basin pipe frame, cover the rubber pad and eye circle on the bolt, bring the nut, and screw it until the end of the pipe frame exceeds the basin fixing hole. >>>More
There are different installation methods for various types, taking the more common wall-mounted and floor-mounted types as examples >>>More
There are different installation methods for various types, taking the more common wall-mounted and floor-mounted types as examples >>>More
1.There are three main types of wash basins: wall-mounted type, column type and desktop type. If you want to save space, you can choose the wall-mounted type, that is, the washbasin installed against the wall, the pipeline is exposed, and it is fixed by screws hanging on the wall, which must require the fixed wall to be a load-bearing wall. >>>More
Specific installation method:
1. First fix the bought "drain" on the wash basin, which is a big nut that is screwed on the drain. >>>More