-
Anonymous users2024-01-24The most common is caused by damage to the water-stop tape that ties the faucet part (fixing screw). In this case, simply remove the faucet with a wrench and re-roll the new water-stop tape where the fixing screws are.
If the faucet is tightly tied, the cause of the leakage may be a leak at the outlet, which is generally caused by the wear of the shaft gasket in the faucet. In this case, you can use pliers to loosen the gland and remove it, take out the shaft gasket with a clip, and replace it with a new shaft spacer.
In addition, it may be that the triangular gasket in the gland is worn and the water leakage in the lower part of the faucet tether. In this case, you can loosen the screw and remove the tie, then loosen the gland and remove it, and then take out the triangular seal on the inside of the gland and replace it with a new one.
In addition, loose cap nuts can also cause water leakage at the pipe joint, and the cap nut can be re-tightened or replaced with a new U-shaped gasket.
A: Some water leakage problems have nothing to do with the faucet itself, but may be caused by improper installation of the water hose and the faucet body. In addition, it can also be caused by problems such as aging, unstable water pressure, or corrosion of the water hose that supplies water to the faucet.
Once the water hose cracks, bursts and other problems, the consequences will also be serious. Therefore, experts recommend checking or replacing the water hose every 1-2 years or so.
A: If you fix it yourself, the first thing you will do is turn off the water supply. Simply turn off one of the water valves near the faucet to turn off the water supply, but if the house is not equipped with a water supply valve for every faucet, you will have to turn off the main water valve to turn off all water supply.
If it is difficult to find the cause of the faucet leakage, you can find a professional repairer to disassemble the faucet and replace the parts.
In fact, the correct use of the faucet should be as light as possible to close and open, no.
First, you can simply replace the valve core of the faucet, you can take a photo of the faucet, go to the hardware store, they will help you with a ceramic valve core, the price is about 5 yuan. Second, the basin can also be replaced with a new faucet, which requires a corresponding special wrench. Most people use the method of lifting the basin to change the faucet.
The quality of this faucet is not good, and the soapy water is not flushed, so it becomes like this.
You can find a plumber to take a look, it is not recommended to go to see it, it is easy to overflow more water, and in the end you still have to ask someone to see it. But if you know how to do it. You can buy a new one yourself. The premise is that it is not found to be a leak in the water pipe.
Because the main faucet of the house water is generally in the kitchen (of course, there are also changes when the waterway is renovated), if it is closed, then of course all the faucets are not leaking, according to what you said, it should be a problem with the faucet in the bathroom, and you can replace one. >>>More
Hello? It's a pipe. Each house is connected from the water meter to the home by a pipe, and then divided into bathrooms, kitchens and other places.