-
Anonymous users2024-01-24It is not necessarily a problem of your home, it may also be a problem of the heating station, the water temperature in the early stage of heating will not be too high, and the pumps in the pump room may not be fully opened, but only the water is tested
-
Anonymous users2024-01-23There is a small valve at one end of the heating, slowly unscrewed to discharge the gas, and when the air is exhausted, there will be water flowing out, and when the water flowing out is hot, the valve will be screwed to death, and the heating will be hot.
-
Anonymous users2024-01-22It is best to find someone from the heating company to recuperate, and it is easy to stain the decoration yourself.
It's probably blocked, find someone to rinse it up.
In fact, the heating at home is not hot enough, and it is okay to increase the indoor temperature by adding radiators. Comparatively speaking, the greater the number of radiators, the higher the heat emitted 。However, it is necessary to pay attention to check what causes the indoor temperature to not reach high. >>>More
They are, and the root cause is that the main pipeline traffic is not enough.
1. All the water is not hot enough, and it will be cold before you leave the house. Generally, the temperature of the effluent is indeed lower than that of the inlet water, because the heat is transmitted to the room, but the inlet water temperature is too low, then it will definitely be so.
Is the heating valve open? Either the pipe is blocked, call the property.